mysqlimport (1) Linux Manual Page

Invoke mysqlimport like this:

shell > mysqlimport[options] db_nametextfile1[textfile2...]

For each text file named on the command line, mysqlimport strips any extension from the file name and uses the result to determine the name of the table into which to import the file’s contents. For example, files named patient.txt, patient.text, and patient all would be imported into a table named patient.

mysqlimport supports the following options, which can be specified on the command line or in the [mysqlimport] and [client] groups of an option file. For information about option files used by MySQL programs, see Section 4.2.2.2, “Using Option Files”.

• –help, -?

Display a help message and exit.

• –bind-address=ip_address

On a computer having multiple network interfaces, use this option to select which interface to use for connecting to the MySQL server.

• –character-sets-dir=dir_name

The directory where character sets are installed. See Section 10.15, “Character Set Configuration”.

• –columns=column_list, -c column_list

This option takes a list of comma-separated column names as its value. The order of the column names indicates how to match data file columns with table columns.

• –compress, -C

Compress all information sent between the client and the server if possible. See Section 4.2.6, “Connection Compression Control”.

As of MySQL 8.0.18, this option is deprecated. It will be removed in a future MySQL version. See the section called “Legacy Connection Compression Configuration”.

• –compression-algorithms=value The permitted compression algorithms for connections to the server. The available algorithms are the same as for the protocol_compression_algorithms system variable. The default value is uncompressed.

For more information, see Section 4.2.6, “Connection Compression Control”.

This option was added in MySQL 8.0.18.

• –debug[=debug_options], -# [debug_options]

Write a debugging log. A typical debug_options string is d:t:o,file_name. The default is d:t:o.

This option is available only if MySQL was built using WITH_DEBUG. MySQL release binaries provided by Oracle are not built using this option.

• –debug-check

Print some debugging information when the program exits.

This option is available only if MySQL was built using WITH_DEBUG. MySQL release binaries provided by Oracle are not built using this option.

• –debug-info

Print debugging information and memory and CPU usage statistics when the program exits.

This option is available only if MySQL was built using WITH_DEBUG. MySQL release binaries provided by Oracle are not built using this option.

• –default-character-set=charset_name

Use charset_name as the default character set. See Section 10.15, “Character Set Configuration”.

• –default-auth=plugin

A hint about which client-side authentication plugin to use. See Section 6.2.17, “Pluggable Authentication”.

• –defaults-extra-file=file_name

Read this option file after the global option file but (on Unix) before the user option file. If the file does not exist or is otherwise inaccessible, an error occurs. file_name is interpreted relative to the current directory if given as a relative path name rather than a full path name.

For additional information about this and other option-file options, see Section 4.2.2.3, “Command-Line Options that Affect Option-File Handling”.

• –defaults-file=file_name

Use only the given option file. If the file does not exist or is otherwise inaccessible, an error occurs. file_name is interpreted relative to the current directory if given as a relative path name rather than a full path name.

Exception: Even with –defaults-file, client programs read .mylogin.cnf.

For additional information about this and other option-file options, see Section 4.2.2.3, “Command-Line Options that Affect Option-File Handling”.

• –defaults-group-suffix=str

Read not only the usual option groups, but also groups with the usual names and a suffix of str. For example, mysqlimport normally reads the [client] and [mysqlimport] groups. If the –defaults-group-suffix=_other option is given, mysqlimport also reads the [client_other] and [mysqlimport_other] groups.

For additional information about this and other option-file options, see Section 4.2.2.3, “Command-Line Options that Affect Option-File Handling”.

• –delete, -D

Empty the table before importing the text file.

• –enable-cleartext-plugin

Enable the mysql_clear_password cleartext authentication plugin. (See Section 6.4.1.4, “Client-Side Cleartext Pluggable Authentication”.)

• –fields-terminated-by=…, –fields-enclosed-by=…, –fields-optionally-enclosed-by=…, –fields-escaped-by=…

These options have the same meaning as the corresponding clauses for LOAD DATA. See Section 13.2.7, “LOAD DATA Statement”.

• –force, -f

Ignore errors. For example, if a table for a text file does not exist, continue processing any remaining files. Without –force, mysqlimport exits if a table does not exist.

• –get-server-public-key

Request from the server the public key required for RSA key pair-based password exchange. This option applies to clients that authenticate with the caching_sha2_password authentication plugin. For that plugin, the server does not send the public key unless requested. This option is ignored for accounts that do not authenticate with that plugin. It is also ignored if RSA-based password exchange is not used, as is the case when the client connects to the server using a secure connection.

If –server-public-key-path=file_name is given and specifies a valid public key file, it takes precedence over –get-server-public-key.

For information about the caching_sha2_password plugin, see Section 6.4.1.2, “Caching SHA-2 Pluggable Authentication”.

• –host=host_name, -h host_name

Import data to the MySQL server on the given host. The default host is localhost.

• –ignore, -i

See the description for the –replace option.

• –ignore-lines=N

Ignore the first N lines of the data file.

• –lines-terminated-by=…

This option has the same meaning as the corresponding clause for LOAD DATA. For example, to import Windows files that have lines terminated with carriage return/linefeed pairs, use –lines-terminated-by="
". (You might have to double the backslashes, depending on the escaping conventions of your command interpreter.) See Section 13.2.7, “LOAD DATA Statement”.

• –local, -L

By default, files are read by the server on the server host. With this option, mysqlimport reads input files locally on the client host.

Successful use of LOCAL load operations within mysqlimport also requires that the server permits local loading; see Section 6.1.6, “Security Issues with LOAD DATA LOCAL”

• –lock-tables, -l

Lock all tables for writing before processing any text files. This ensures that all tables are synchronized on the server.

• –login-path=name

Read options from the named login path in the .mylogin.cnf login path file. A “login path” is an option group containing options that specify which MySQL server to connect to and which account to authenticate as. To create or modify a login path file, use the mysql_config_editor utility. See mysql_config_editor(1).

For additional information about this and other option-file options, see Section 4.2.2.3, “Command-Line Options that Affect Option-File Handling”.

• –low-priority

Use LOW_PRIORITY when loading the table. This affects only storage engines that use only table-level locking (such as MyISAM, MEMORY, and MERGE).

• –no-defaults

Do not read any option files. If program startup fails due to reading unknown options from an option file, –no-defaults can be used to prevent them from being read.

The exception is that the .mylogin.cnf file, if it exists, is read in all cases. This permits passwords to be specified in a safer way than on the command line even when –no-defaults is used. (.mylogin.cnf is created by the mysql_config_editor utility. See mysql_config_editor(1).)

For additional information about this and other option-file options, see Section 4.2.2.3, “Command-Line Options that Affect Option-File Handling”.

• –password[=password], -p[password]

The password of the MySQL account used for connecting to the server. The password value is optional. If not given, mysqlimport prompts for one. If given, there must be no space between –password= or -p and the password following it. If no password option is specified, the default is to send no password.

Specifying a password on the command line should be considered insecure. To avoid giving the password on the command line, use an option file. See Section 6.1.2.1, “End-User Guidelines for Password Security”.

To explicitly specify that there is no password and that mysqlimport should not prompt for one, use the –skip-password option.

• –pipe, -W

On Windows, connect to the server using a named pipe. This option applies only if the server was started with the named_pipe system variable enabled to support named-pipe connections. In addition, the user making the connection must be a member of the Windows group specified by the named_pipe_full_access_group system variable.

• –plugin-dir=dir_name

The directory in which to look for plugins. Specify this option if the –default-auth option is used to specify an authentication plugin but mysqlimport does not find it. See Section 6.2.17, “Pluggable Authentication”.

• –port=port_num, -P port_num

For TCP/IP connections, the port number to use.

• –print-defaults

Print the program name and all options that it gets from option files.

For additional information about this and other option-file options, see Section 4.2.2.3, “Command-Line Options that Affect Option-File Handling”.

• –protocol={TCP|SOCKET|PIPE|MEMORY}

The connection protocol to use for connecting to the server. It is useful when the other connection parameters normally result in use of a protocol other than the one you want. For details on the permissible values, see Section 4.2.4, “Connecting to the MySQL Server Using Command Options”.

• –replace, -r

The –replace and –ignore options control handling of input rows that duplicate existing rows on unique key values. If you specify –replace, new rows replace existing rows that have the same unique key value. If you specify –ignore, input rows that duplicate an existing row on a unique key value are skipped. If you do not specify either option, an error occurs when a duplicate key value is found, and the rest of the text file is ignored.

• –server-public-key-path=file_name

The path name to a file containing a client-side copy of the public key required by the server for RSA key pair-based password exchange. The file must be in PEM format. This option applies to clients that authenticate with the sha256_password or caching_sha2_password authentication plugin. This option is ignored for accounts that do not authenticate with one of those plugins. It is also ignored if RSA-based password exchange is not used, as is the case when the client connects to the server using a secure connection.

If –server-public-key-path=file_name is given and specifies a valid public key file, it takes precedence over –get-server-public-key.

For sha256_password, this option applies only if MySQL was built using OpenSSL.

For information about the sha256_password and caching_sha2_password plugins, see Section 6.4.1.3, “SHA-256 Pluggable Authentication”, and Section 6.4.1.2, “Caching SHA-2 Pluggable Authentication”.

• –shared-memory-base-name=name

On Windows, the shared-memory name to use for connections made using shared memory to a local server. The default value is MYSQL. The shared-memory name is case-sensitive.

This option applies only if the server was started with the shared_memory system variable enabled to support shared-memory connections.

• –silent, -s

Silent mode. Produce output only when errors occur.

• –socket=path, -S path

For connections to localhost, the Unix socket file to use, or, on Windows, the name of the named pipe to use.

On Windows, this option applies only if the server was started with the named_pipe system variable enabled to support named-pipe connections. In addition, the user making the connection must be a member of the Windows group specified by the named_pipe_full_access_group system variable.

• –ssl*

Options that begin with –ssl specify whether to connect to the server using SSL and indicate where to find SSL keys and certificates. See the section called “Command Options for Encrypted Connections”.

• –ssl-fips-mode={OFF|ON|STRICT} Controls whether to enable FIPS mode on the client side. The –ssl-fips-mode option differs from other –ssl-xxx options in that it is not used to establish encrypted connections, but rather to affect which cryptographic operations are permitted. See Section 6.5, “FIPS Support”.

These –ssl-fips-mode values are permitted:

• OFF: Disable FIPS mode.

• ON: Enable FIPS mode.

• STRICT: Enable “strict” FIPS mode.

Note
If the OpenSSL FIPS Object Module is not available, the only permitted value for –ssl-fips-mode is OFF. In this case, setting –ssl-fips-mode to ON or STRICT causes the client to produce a warning at startup and to operate in non-FIPS mode.

• –tls-ciphersuites=ciphersuite_list

The permissible ciphersuites for encrypted connections that use TLSv1.3. The value is a list of one or more colon-separated ciphersuite names. The ciphersuites that can be named for this option depend on the SSL library used to compile MySQL. For details, see Section 6.3.2, “Encrypted Connection TLS Protocols and Ciphers”.

This option was added in MySQL 8.0.16.

• –tls-version=protocol_list

The permissible TLS protocols for encrypted connections. The value is a list of one or more comma-separated protocol names. The protocols that can be named for this option depend on the SSL library used to compile MySQL. For details, see Section 6.3.2, “Encrypted Connection TLS Protocols and Ciphers”.

• –user=user_name, -u user_name

The user name of the MySQL account to use for connecting to the server.

• –use-threads=N

Load files in parallel using N threads.

• –verbose, -v

Verbose mode. Print more information about what the program does.

• –version, -V

Display version information and exit.

• –zstd-compression-level=level The compression level to use for connections to the server that use the zstd compression algorithm. The permitted levels are from 1 to 22, with larger values indicating increasing levels of compression. The default zstd compression level is 3. The compression level setting has no effect on connections that do not use zstd compression.

For more information, see Section 4.2.6, “Connection Compression Control”.

This option was added in MySQL 8.0.18.

Here is a sample session that demonstrates use of mysqlimport:

shell > mysql - e 'CREATE TABLE imptest(id INT, n VARCHAR(30))' test
                    shell >
        ed
            a 100 Max Sydow 101 Count Dracula
                .w imptest.txt 32 q
                    shell > od - c imptest.txt 0000000 1 0 0  	 M a x S y d o w  
 1 0 0000020 1  	 C o u n t D r a c u l a  
 0000040 shell >
        mysqlimport-- local test imptest.txt
            test.imptest : Records : 2 Deleted : 0 Skipped : 0 Warnings : 0 shell > mysql - e 'SELECT * FROM imptest' test + -- -- --+-- -- -- -- -- -- -- -+ |
    id | n |
    +-- -- --+-- -- -- -- -- -- -- -+ | 100 | Max Sydow |
    | 101 | Count Dracula |
    +-- -- --+-- -- -- -- -- -- -- -+

COPYRIGHT

Copyright © 1997, 2020, Oracle and/or its affiliates. All rights reserved.

This documentation is free software; you can redistribute it and/or modify it only under the terms of the GNU General Public License as published by the Free Software Foundation; version 2 of the License.

This documentation is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with the program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or see http://www.gnu.org/licenses/.

SEE ALSO

For more information, please refer to the MySQL Reference Manual, which may already be installed locally and which is also available online at http://dev.mysql.com/doc/.

AUTHOR

Oracle Corporation (http://dev.mysql.com/).

Index