Qmicli (1) Linux Manual Page

NAME

qmicli – Control QMI devices

DESCRIPTION

Usage:

: lt-qmicli [OPTION…] – Control QMI devices

Help Options:

-h, –help: Show help options
–help-all: Show all help options
–help-dms: Show Device Management Service options
–help-nas: Show Network Access Service options
–help-wds: Show Wireless Data Service options
–help-pbm: Show Phonebook Management options
–help-uim: Show User Identity Module options
–help-wms: Show Wireless Messaging Service options
–help-wda: Show Wireless Data Administrative options
–help-voice: Show Voice Service options

DMS options

–dms-get-ids: Get IDs
–dms-get-capabilities: Get capabilities
–dms-get-manufacturer: Get manufacturer
–dms-get-model: Get model
–dms-get-revision: Get revision
–dms-get-msisdn: Get MSISDN
–dms-get-power-state: Get power state
–dms-uim-set-pin-protection=,[/(PIN|PIN2),(disable|enable),(current PIN)]: Set PIN protection in the UIM
–dms-uim-verify-pin=,[/(PIN|PIN2),(current PIN)]: Verify PIN
–dms-uim-unblock-pin=,[/(PIN|PIN2),(PUK),(new PIN)]: Unblock PIN
–dms-uim-change-pin=,[/(PIN|PIN2),(old PIN),(new PIN)]: Change PIN
–dms-uim-get-pin-status: Get PIN status
–dms-uim-get-iccid: Get ICCID
–dms-uim-get-imsi: Get IMSI
–dms-uim-get-state: Get UIM State
–dms-uim-get-ck-status=,[/(pn|pu|pp|pc|pf)]: Get CK Status
–dms-uim-set-ck-protection=,[/(pn|pu|pp|pc|pf),(disable),(key)]: Disable CK protection
–dms-uim-unblock-ck=,[/(pn|pu|pp|pc|pf),(key)]: Unblock CK
–dms-get-hardware-revision: Get the HW revision
–dms-get-operating-mode: Get the device operating mode
–dms-set-operating-mode=,[/(Operating mode)]: Set the device operating mode
–dms-get-time: Get the device time
–dms-get-prl-version: Get the PRL version
–dms-get-activation-state: Get the state of the service activation
–dms-activate-automatic=,[Activation/ Code]: Request automatic service activation
–dms-activate-manual=,[SPC/,SID,MDN,MIN]: Request manual service activation
–dms-get-user-lock-state: Get the state of the user lock
–dms-set-user-lock-state=,[/(disable|enable),(current lock code)]: Set the state of the user lock
–dms-set-user-lock-code=,[/(old lock code),(new lock code)]: Change the user lock code
–dms-read-user-data: Read user data
–dms-write-user-data=,[/(User data)]: Write user data
–dms-read-eri-file: Read ERI file
–dms-restore-factory-defaults=,[/(Service Programming Code)]: Restore factory defaults
–dms-validate-service-programming-code=,[/(Service Programming Code)]: Validate the Service Programming Code
–dms-get-band-capabilities: Get band capabilities
–dms-get-factory-sku: Get factory stock keeping unit
–dms-list-stored-images: List stored images
–dms-select-stored-image=,[modem/#,pri#] where # is the index: Select stored image
–dms-delete-stored-image=,[modem/#|pri#] where # is the index: Delete stored image
–dms-set-fcc-authentication: Set FCC authentication
–dms-get-supported-messages: Get supported messages
–dms-reset: Reset the service state
–dms-noop: Just allocate or release a DMS client. Use with `–client-no-release-cid’ and/or `–client-cid’

NAS options

–nas-get-signal-strength: Get signal strength
–nas-get-signal-info: Get signal info
–nas-get-tx-rx-info=,[/(Radio Interface)]: Get TX/RX info
–nas-get-home-network: Get home network
–nas-get-serving-system: Get serving system
–nas-get-system-info: Get system info
–nas-get-technology-preference: Get technology preference
–nas-get-system-selection-preference: Get system selection preference
–nas-set-system-selection-preference=,[cdma-1x/|cdma-1xevdo|gsm|umts|lte|td-scdma]: Set system selection preference
–nas-network-scan: Scan networks
–nas-get-cell-location-info: Get Cell Location Info
–nas-force-network-search: Force network search
–nas-get-lte-cphy-ca-info: Get LTE Cphy CA Info
–nas-get-supported-messages: Get supported messages
–nas-reset: Reset the service state
–nas-noop: Just allocate or release a NAS client. Use with `–client-no-release-cid’ and/or `–client-cid’

WDS options

–wds-start-network=,[/"key=value,…"]: Start network (allowed keys: apn, 3gpp-profile, 3gpp2-profile, auth (PAP|CHAP|BOTH), username, password, autoconnect=yes)
–wds-follow-network: Follow the network status until disconnected. Use with `–wds-start-network’
–wds-stop-network=,[Packet/ data handle] OR [disable-autoconnect]: Stop network
–wds-get-current-settings: Get current settings
–wds-get-packet-service-status: Get packet service status
–wds-get-packet-statistics: Get packet statistics
–wds-get-data-bearer-technology: Get data bearer technology
–wds-get-current-data-bearer-technology: Get current data bearer technology
–wds-get-profile-list=,[3gpp/|3gpp2]: Get profile list
–wds-get-default-settings=,[3gpp/|3gpp2]: Get default settings
–wds-get-autoconnect-settings: Get autoconnect settings
–wds-set-autoconnect-settings=,[/(enabled|disabled|paused)[,(roaming-allowed|home-only)]]: Set autoconnect settings (roaming settings optional)
–wds-get-supported-messages: Get supported messages
–wds-reset: Reset the service state
–wds-noop: Just allocate or release a WDS client. Use with `–client-no-release-cid’ and/or `–client-cid’

PBM options

–pbm-get-all-capabilities: Get all phonebook capabilities
–pbm-noop: Just allocate or release a PBM client. Use with `–client-no-release-cid’ and/or `–client-cid’

UIM options

–uim-set-pin-protection=,[/(PIN1|PIN2|UPIN),(disable|enable),(current PIN)]: Set PIN protection
–uim-verify-pin=,[/(PIN1|PIN2|UPIN),(current PIN)]: Verify PIN
–uim-unblock-pin=,[/(PIN1|PIN2|UPIN),(PUK),(new PIN)]: Unblock PIN
–uim-change-pin=,[/(PIN1|PIN2|UPIN),(old PIN),(new PIN)]: Change PIN
–uim-read-transparent=,[0xNNNN/,0xNNNN,…]: Read a transparent file given the file path
–uim-get-file-attributes=,[0xNNNN/,0xNNNN,…]: Get the attributes of a given file
–uim-get-card-status: Get card status
–uim-get-supported-messages: Get supported messages
–uim-reset: Reset the service state
–uim-noop: Just allocate or release a UIM client. Use with `–client-no-release-cid’ and/or `–client-cid’

WMS options

–wms-get-supported-messages: Get supported messages
–wms-reset: Reset the service state
–wms-noop: Just allocate or release a WMS client. Use with `–client-no-release-cid’ and/or `–client-cid’

WDA options

–wda-set-data-format=,[raw-ip/|802-3]: Set data format
–wda-get-data-format: Get data format
–wda-get-supported-messages: Get supported messages
–wda-noop: Just allocate or release a WDA client. Use with `–client-no-release-cid’ and/or `–client-cid’

VOICE options

–voice-get-config: Get Voice service configuration
–voice-get-supported-messages: Get supported messages
–voice-noop: Just allocate or release a VOICE client. Use with `–client-no-release-cid’ and/or `–client-cid’

Application Options:

-d, –device=,[PATH]/: Specify device path
-w, –get-wwan-iface: Get the WWAN iface name associated with this control port
-e, –get-expected-data-format: Get the expected data format in the WWAN iface
-E, –set-expected-data-format=,[802-3/|raw-ip]: Set the expected data format in the WWAN iface
–get-service-version-info: Get service version info
–device-set-instance-id=,[Instance/ ID]: Set instance ID
–device-open-version-info: Run version info check when opening device
–device-open-sync: Run sync operation when opening device
-p, –device-open-proxy: Request to use the ‘qmi-proxy’ proxy
–device-open-mbim: Open an MBIM device with EXT_QMUX support
–device-open-net=,[net-802-3/|net-raw-ip|net-qos-header|net-no-qos-header]: Open device with specific link protocol and QoS flags
–client-cid=,[CID]/: Use the given CID, don’t allocate a new one
–client-no-release-cid: Do not release the CID when exiting
-v, –verbose: Run action with verbose logs, including the debug ones
–silent: Run action with no logs; not even the error/warning ones
-V, –version: Print version

qmicli 1.15.0 Copyright © 2015 Aleksander Morgado License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl-2.0.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law.

qmicli (1) Linux Manual Page

NAME

DESCRIPTION

Usage:

Help Options:

Application Options:

SEE ALSO

Index

Leave a Reply Cancel reply