fence_bladecenter_snmp (8) Linux Manual Page
fence_bladecenter_snmp – Fence agent for IBM BladeCenter over SNMP
Description
fence_bladecenter_snmp is an I/O Fencing agent which can be used with IBM BladeCenter chassis. It issues SNMP Set request to BladeCenter chassis, rebooting, powering up or down the specified Blade Server. fence_bladecenter_snmp accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_bladecenter_snmp can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts.
Vendor URL: http://www.ibm.com
Parameters
- -o, –action=<action>
- Fencing Action (Default Value: reboot)
- -a, –ip=<ip>
- IP Address or Hostname This parameter is always required.
- -l, –username=<name>
- Login Name
- -p, –password=<password>
- Login password or passphrase
- -S, –password-script=<script>
- Script to retrieve password
- -n, –plug=<id>
- Physical plug number or name of virtual machine This parameter is always required.
- -d, –snmp-version=<ver>
- Specifies SNMP version to use (1,2c,3) (Default Value: 1)
- -c, –community=<community>
- Set the community string
- -b, –snmp-auth-prot=<prot>
- Set authentication protocol (MD5|SHA)
- -E, –snmp-sec-level=<level>
- Set security level (noAuthNoPriv|authNoPriv|authPriv)
- -B, –snmp-priv-prot=<prot>
- Set privacy protocol (DES|AES)
- -P, –snmp-priv-passwd=<pass>
- Set privacy protocol password
- -R, –snmp-priv-passwd-script
- Script to run to retrieve privacy password
- -u, –udpport
- UDP/TCP port to use for connection with device (Default Value: 161)
- -4, –inet4-only
- Forces agent to use IPv4 addresses only
- -6, –inet6-only
- Forces agent to use IPv6 addresses only
- -v, –verbose
- Verbose mode
- -D, –debug-file=<debugfile>
- Write debug information to given file
- -V, –version
- Display version information and exit
- -h, –help
- Display help and exit
- -C, –separator=<char>
- Separator for CSV created by operation list (Default Value: ,)
- –power-timeout
- Test X seconds for status change after ON/OFF (Default Value: 20)
- –shell-timeout
- Wait X seconds for cmd prompt after issuing command (Default Value: 3)
- –login-timeout
- Wait X seconds for cmd prompt after login (Default Value: 5)
- –power-wait
- Wait X seconds after issuing ON/OFF (Default Value: 0)
- –retry-on
- Count of attempts to retry power on (Default Value: 1)
- –delay
- Wait X seconds before fencing is started (Default Value: 0)
Actions
- on
- Power on machine.
- off
- Power off machine.
- reboot
- Reboot machine.
- status
- This returns the status of the plug/virtual machine.
- list
- List available plugs with aliases/virtual machines if there is support for more then one device. Returns N/A otherwise.
- monitor
- Check if fencing device is running. List available plugs/virtual machines or get status of machine (if it does not support more).
- metadata
-
The operational behavior of this is not known.
Stdin Parameters
- action
- Fencing Action (Default Value: reboot)
- ipaddr
- IP Address or Hostname This parameter is always required.
- login
- Login Name
- passwd
- Login password or passphrase
- passwd_script
- Script to retrieve password
- port
- Physical plug number or name of virtual machine This parameter is always required.
- snmp_version
- Specifies SNMP version to use (1,2c,3) (Default Value: 1)
- community
- Set the community string
- snmp_auth_prot
- Set authentication protocol (MD5|SHA)
- snmp_sec_level
- Set security level (noAuthNoPriv|authNoPriv|authPriv)
- snmp_priv_prot
- Set privacy protocol (DES|AES)
- snmp_priv_passwd
- Set privacy protocol password
- snmp_priv_passwd_script
- Script to run to retrieve privacy password
- udpport
- UDP/TCP port to use for connection with device (Default Value: 161)
- inet4_only
- Forces agent to use IPv4 addresses only
- inet6_only
- Forces agent to use IPv6 addresses only
- verbose
- Verbose mode
- debug
- Write debug information to given file
- version
- Display version information and exit
- help
- Display help and exit
- separator
- Separator for CSV created by operation list (Default Value: ,)
- power_timeout
- Test X seconds for status change after ON/OFF (Default Value: 20)
- shell_timeout
- Wait X seconds for cmd prompt after issuing command (Default Value: 3)
- login_timeout
- Wait X seconds for cmd prompt after login (Default Value: 5)
- power_wait
- Wait X seconds after issuing ON/OFF (Default Value: 0)
- retry_on
- Count of attempts to retry power on (Default Value: 1)
- delay
- Wait X seconds before fencing is started (Default Value: 0)