victronups (8) Linux Manual Page
victronups – Driver for IMV/Victron UPS unit Match, Match Lite, NetUps
Note
This man page only documents the hardware-specific features of the the victronups driver. For information about the core driver, see nutupsdrv(8).
Supported Hardware
The victronups driver should recognize all Victron models that use a serial protocol at 1200 bps. These include Match Lite, Match and the NetUps line.
The Match Lite line may only report a handful of variables. This is usually not a bug – they just don’t support anything else.
Cabling
If your Victron cable is broken or missing, use this diagram to build a clone:
docs/cables/victron.txt
Extra Arguments
This driver supports the following optional setting in the ups.conf(5):
modelname=name
- Set model name
usd=delay
- Set delay before shutdown on UPS
Bugs
The protocol for this UPS is not officially documented.
Author
Radek Benedikt <benedikt [at] lphard.cz>, Daniel Prynych <Daniel.Prynych [at] hornet.cz>
See Also
The core driver:
nutupsdrv(8)
Internet resources:
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/