dar_split – dar helper to split an archive over several tapes Synopsisdar_split { split_input | split_output } <filename> dar_split -v dar_split -h Descriptiondar_split is to be used with dar to read or write a large archive from or to several tapes. Optionsdar_split has two modes of operation: split_input and split_output split_input in this mode dar_split…
dar_slave – disk archive slave for remote access to a dar archive Synopsisdar_slave [options] [<path>/]source dar_slave -h dar_slave -V Descriptiondar_slave reads an archive and listens for dar orders on standard input, sending asked parts of the archive on standard output. Source is the basename of the archive to read. By default, dar_slave uses standard input…
dar_manager – compiles several archives contents in a database to ease file restoration Synopsisdar_manager [-v] -C [<path>/]<database> dar_manager [-v] -B [<path>/]<database> -A [<path>/]<basename> [-9 <min-digits>] [[<path>/]<archive_basename>] dar_manager [-v] -B [<path>/]<database> -l dar_manager [-v] -B [<path>/]<database> -D <number>[-<number>] dar_manager [-v] -B [<path>/]<database> -b <number> <new_archive_basename> dar_manager [-v] -B [<path>/]<database> -p <number> <path> dar_manager [-v] -B [<path>/]<database>…
dar_cp – ‘cp’ clone command that is able to copy data located after an I/O error Synopsisdar_cp <source file> <destination file> dar_cp -h dar_cp -V Descriptiondar_cp is similar to the standard ‘cp’ command, except it does not stop copying when an I/O error is met. Instead, it skips a bit further and continues to copy…
dar – creates, tests, lists, extracts, compares, merges, isolates dar archives Synopsisdar [-c | -t | -l | -x | -d | -+ | -C] [<path>/]<basename> [<options>] [<user targets>] dar -h dar -V Descriptiondar is a full featured backup tool, aimed for disks (floppy, CD-R(W), DVD-R(W), zip, jazz, hard-disks, usb keys, etc.) and since release…
dapltest – test for the Direct Access Programming Library (DAPL) DescriptionDapltest is a set of tests developed to exercise, characterize, and verify the DAPL interfaces during development and porting. At least two instantiations of the test must be run. One acts as the server, fielding requests and spawning server-side test threads as needed. Other client…
dapltest – test for the Direct Access Programming Library (DAPL) DescriptionDapltest is a set of tests developed to exercise, characterize, and verify the DAPL interfaces during development and porting. At least two instantiations of the test must be run. One acts as the server, fielding requests and spawning server-side test threads as needed. Other client…
daily_cleanup.py – Database clean-up for the Django Web framework Synopsisdaily_cleanup.py DescriptionRemoves stale session data from a Django database. This means, any session data which has an expiry date prior to the date the script is run. The script can be run manually or can be scheduled to run at regular intervals as a cron job….
daemonize – run a program as a Unix daemon Synopsisdaemonize [-a] [-c directory] [-e stderr] [-o stdout] [-p pidfile] [-l lockfile] [-u user] [-v] path [arg] … Descriptiondaemonize runs a command as a Unix daemon. As defined in W. Richard Stevens’ 1990 book, Unix Network Programming (Addison-Wesley, 1990), a daemon is “a process that executes…
da – setup development environment and create basic projects in various languages Synopsisda [–debug] [–no-cache] [ ASSISTANT_TYPE ] [ OPTIONS ] [[ SUBASSISTANT ] [OPTIONS] …] da [–debug] [–no-cache] [ ACTION ] [ OPTIONS ] Descriptionda is the main command of DevAssistant. It is responsible for dispatching commandline calls to assistants or actions. It accepts…
d.zoom – Allows the user to change the current geographic region settings interactively, with a mouse. Keywordsdisplay Synopsisd.zoom d.zoom help d.zoom [-fphjr] rast=string[,string,…] [vector=string[,string,…]] [zoom=float] [–verbose] [–quiet] Flags:-f Full menu (zoom + pan) & Quit menu -p Pan mode -h Handheld mode -j Just redraw given maps using default colors -r Return to previous zoom…
makecert – no title found SynopsisPlease add @interface section in ../src/makecert.c.DescriptionPlease add @header section in ../src/makecert.c. Please add @discuss section in ../src/makecert.c. ExampleFrom makecert_test method. Please add @selftest section in ../src/makecert.c.AuthorsThe czmq manual was written by the authors in the AUTHORS file. ResourcesMain web site: m[blue]m[] Report bugs to the email <m[blue]zeromq-dev [at] lists.zeromq.orgm[][1]> CopyrightCopyright…
cyradm – Cyrus administration shell, alter ego of Cyrus::IMAP::Shell Synopsis $ cyradm [–user user] [–[no]rc] [–systemrc file] [–userrc file] \ > [–port n] [–auth mechanism] [–tlskey keyfile] [–notls] \ > [–server] serverbut possibly $ perl -MCyrus::IMAP::Shell -e ‘run("myscript")’or even (not recommended) use Cyrus::IMAP::Admin::Shell; run(‘myscriptname’);DescriptionThis module implements cyradm in Perl. It is a shell around Cyrus::IMAP::Admin….
cycle – a calendar for women Synopsiscycle DescriptionCycle is a calendar program for women. Given a cycle length or statistics for several periods, it can calculate the days until menstruation, the days of "safe" sex, the fertile period, and the days to ovulations, and define the d.o.b. (date of birth) of a child. It allows…
cxxtestgen – performs test discovery to create a CxxTest test runner Synopsiscxxtestgen [options] [<filename> …] DescriptionThe cxxtestgen command processes C++ header files to perform test discovery, and then it creates files for the CxxTest test runner. Options-h, –help show this help message and exit –version Write the CxxTest version. -o, –output=NAME Write output to file…
cxxmetric – Simple source metrics for C and C++ Synopsis cxxmetric [file]Descriptioncxxmetric counts lines of code, comment and blank space and calculates various other statistics for each given source file. Source files must be in C or C++. This utility is part of the KDE Software Development Kit. AuthorBen Burton <bab [at] debian.org> Author.
cxpm – Check an XPM (X PixMap) file, versions XPM 1, 2, or 3. Synopsiscxpm [filename] DescriptionThe cxpm program can be used to check the format of any XPM (version 1, 2, or 3) file. On error, unlike sxpm, cxpm prints out an error message indicating where the parser choked. This should help finding out…
cwebp – compress an image file to a WebP file Synopsiscwebp [options] input_file -o output_file.webp DescriptionThis manual page documents the cwebp command. cwebp compresses an image using the WebP format. Input format can be either PNG, JPEG, TIFF or raw Y’CbCr samples. OptionsThe basic options are: -o string Specify the name of the output WebP…
ctangle, cweave – translate CWEB to C/C++ and/or TeX Synopsisctangle [options] webfile[.w] [{changefile[.ch]|-} [outfile[.c]]] cweave [options] webfile[.w] [{changefile[.ch]|-} [outfile[.tex]]] DescriptionThe ctangle program converts a CWEB source document into a C/C++ program that may be compiled in the usual way. The output file includes #line specifications so that debugging can be done in terms of the CWEB…
ctangle, cweave – translate CWEB to C/C++ and/or TeX Synopsisctangle [options] webfile[.w] [{changefile[.ch]|-} [outfile[.c]]] cweave [options] webfile[.w] [{changefile[.ch]|-} [outfile[.tex]]] DescriptionThe ctangle program converts a CWEB source document into a C/C++ program that may be compiled in the usual way. The output file includes #line specifications so that debugging can be done in terms of the CWEB…