NINJAHELPER – A menu driven curses-based interface to walk you through backupninja configuration. Synopsisninjahelper DescriptionNinjahelper is an helper script to walk you through configuration of the backup tasks for backupninja. It is a curses based "wizard" with an intuitive menu-driven interface. Adding New HelpersTo add an additional ‘wizard’ to ninjahelper, follow these steps: (1) create…
ninja – small build system closest in spirit to Make Descriptionusage: ninja [options] [targets…] if targets are unspecified, builds the ‘default’ target (see manual). options:–version print ninja version ("1.10.1") -v, –verbose show all command lines while building -C DIR change to DIR before doing anything else -f FILE specify input build file [default=build.ninja] -j N…
nikto – Scan web server for known vulnerabilities Synopsis /usr/local/bin/nikto [options…]DescriptionExamine a web server to find potential problems and security vulnerabilities, including: •Server and software misconfigurations•Default files and programs•Insecure files and programs•Outdated servers and programs Nikto is built on LibWhisker (by RFP) and can run on any platform which has a Perl environment. It supports…
nightfall – binary star astronomy Synopsisnightfall -h nightfall -U [more options] [mass_ratio inclination primary_size secondary_size primary_temperature secondary_temperature] nightfall [-G] [-A] [more options] mass_ratio inclination primary_size secondary_size primary_temperature secondary_temperature nightfall [-G | -U] [-A] [more options] -C file Descriptionnightfall is an interactive astronomy program for fun, education and science. It can generate animated views of eclipsing…
night_temperature – a camera temperature Synopsis night_temperature [get|set] [-t temperature] [-off] [-host address] DescriptionThe options are as follows: options get: -t print ccd current temperature in degrees of Celsius -ta print air current temperature in degrees of Celsius -ts print temperature setpoint in degrees of Celsius -r print current cooling power (relatively, in percents) -f print current status of fan,…
night_power – control the power of camera Synopsis night_power {on|off|info} [-host address] DescriptionThe options are as follows: options: on switch on camera, failed if cammera not connected off switch off camera info print short info about camera login login into server (test of connection) -host address:port internet address server, default: local connectEnvironmentSetting of environment…
night_keylist – print value of the FITS header keyword Synopsis night_keylist [image keyword] DescriptionThe options are as follows: This routine is internal part of the nightview package and the user isn’t supposed invoke it directly at anytime. Reporting Bugshttp://integral.sci.muni.cz BugsNot found except listed on http://integral.sci.muni.cz. See Alsonightview(1). See the /usr/share/doc/nightview-doc directory for description. Homepage: http://www.physics.muni.cz/mb/nightview/ AuthorThis manual…
night_flats – non-iteractive flat snapshoting with CCD camera Synopsis night_flats [options] exptime1,filter1 [exptime2,filter2] … DescriptionThe options are as follows: -oo output filename mask, default: ” -o output prefix name, default: ‘f’ -n number of exposures, default=0 -obsname,-observer observer’s name -name,-object object’s name, default: -name flat -d auto-dark substract, dark interval, default: 0 no darks -w wait for specified num. of…
night_filter – select filter or print current one Synopsis night_filter [-f filter] [-list] DescriptionThe options are as follows: options: info print current filter -f set filter, one from -list -list list of defined filters -init (re)initialize filter wheel -p show progress indicator -host address:port internet address server, default: local connectEnvironmentSetting of environment variable NIGHTVIEW_HOST is equivalent to…
night_exposure – make a single exposure on a camera Synopsis night_exposure [-t time] [-s shutter on|off] [-b 1|2|3] [-o output] DescriptionThe options are as follows: options: -t exposure time in seconds -s shutter state, on – open, off – close for dark frame -r select region by format: (x1,y1,x2,y2), default: full area -b binning, 1 – 1×1, 2 – 2×2, 3…
night_darks – non-iteractive dark snapshoting with CCD camera Synopsis night_darks [options] exptime1 [exptime2] … DescriptionThe options are as follows: -oo output filename mask, default: ” -o output prefix name, default: ‘d’ -n number of exposures, default=0 -obsname,-observer observer’s name -name,-object object’s name, default: -name dark -w wait for specified num. of seconds, integer, default: 1 -b binning, default=3 -r select…
night_dark – subtract dark from image Synopsis night_dark [result image dark] DescriptionThe options are as follows: This routine is internal part of the nightview package and the user isn’t supposed invoke it directly at anytime. Reporting Bugshttp://integral.sci.muni.cz BugsNot found except listed on http://integral.sci.muni.cz. See Alsonightview(1). See the /usr/share/doc/nightview-doc directory for description. Homepage: http://www.physics.muni.cz/mb/nightview/ AuthorThis manual page was…
night_batch – non-interactive snapshoting with CCD camera Synopsis night_control [options] exptime1,filter1 [exptime2,filter2] … DescriptionThe options are as follows: -oo output filename mask, default: ” -o output prefix name, default: ‘image’ -n number of exposures, default=0 -obsname,-observer observer’s name -name,-object object’s name -d auto-dark substract, dark interval, default: 0 no darks -w wait for specified num. of seconds, integer, default: 1…
night_batch – non-interactive snapshoting with CCD camera Synopsis night_control [options] exptime1,filter1 [exptime2,filter2] … DescriptionThe options are as follows: -oo output filename mask, default: ” -o output prefix name, default: ‘image’ -n number of exposures, default=0 -obsname,-observer observer’s name -name,-object object’s name -d auto-dark substract, dark interval, default: 0 no darks -w wait for specified num. of seconds, integer, default: 1…
naim – console mode chat client Synopsisnaim nicq nirc [nickname [server]] nlily Descriptionnaim is the original ncurses AIM client. It uses the TOC protocol, and features many commonly-requested features found nowhere else, while still providing an intuitive chat interface. OptionsIf a `.naimrc‘ file exists in your home directory, naim executes that and ignores all command…
nicotine is a graphical client for the SoulSeek peer-to-peer network. Synopsisnicotine [options] Descriptionnicotine is a GTK-based client for the SoulSeek peer-to-peer network written in Python. Options-c <file>, –config=<file> Use <file> as configuration file. If <file> does not exists a new empty configuration file will be created. -d, –disable-trayicon -t, –enable-trayicon Enable/disable the tray icon. -h,…
nicotine-import-winconfig is a script to convert SoulSeek Windows client configuration file to the Nicotine format. Synopsisnicotine-import-winconfig [options] <path_to_the_windows_soulseek_files> Descriptionnicotine-import-winconfig will read the SoulSeek Windows client configuration file and will extract information like download queue, userlist, login information, list of autojoined chatrooms, list of banned users, user info/picture, and write them to $HOME/.nicotine/config, which is the…
nickle – a desk calculator language Synopsisnickle [–help|–usage] [-f file] [-l library] [-e expr] [ script ] [–] [arg …] DescriptionNickle is a desk calculator language with powerful programming and scripting capabilities. Nickle supports a variety of datatypes, especially arbitrary precision integers, rationals, and imprecise reals. The input language vaguely resembles C. Some things in…
nice – run a program with modified scheduling priority Synopsisnice [,OPTION/] [,COMMAND /[,ARG/]…] DescriptionRun COMMAND with an adjusted niceness, which affects process scheduling. With no COMMAND, print the current niceness. Niceness values range from -20 (most favorable to the process) to 19 (least favorable to the process). Mandatory arguments to long options are mandatory for…
nhlf90 – Command for compiling Fortran code that uses the NCAR Graphics high-level utilities. Synopsisnhlf90 [-ngmath] [-ncarbd] [-ngmathbd] [-netcdf] [-hdf] … Descriptionnhlf90 is a script that invokes the FORTRAN 90 compiler/linker with the proper NCAR Graphics LLU (low-level utility) and HLU (high-level utility) libraries. Arguments presented above are associated with NCAR Graphics. All other arguments…