ikiwiki-update-wikilist – add or remove user from /etc/ikiwiki/wikilist Synopsisikiwiki-update-wikilist [-r] Descriptionikiwiki-update-wikilist is designed to be made suid root, but is not installed suid by default. If made suid, it allows users to add or remove their names from the /etc/ikiwiki/wikilist file. By default, the user’s name will be added. The -r switch causes the user’s…
ikiwiki-transition – transition ikiwiki pages to new syntaxes, etc Synopsisikiwiki-transition type … Descriptionikiwiki-transition aids in converting wiki pages when there’s a major change in ikiwiki syntax. It also handles other transitions not involving wiki pages. prefix_directives your.setupThe prefix_directives mode converts all pages from the old preprocessor directive syntax, requiring a space, to the new syntax,…
ikiwiki-makerepo – check an ikiwiki srcdir into revision control Synopsisikiwiki-makerepo git|svn|monotone|darcs|cvs srcdir repository ikiwiki-makerepo bzr|mercurial srcdir Descriptionikiwiki-makerepo injects a srcdir directory, containing an ikiwiki wiki, into a repository that it creates. The repository can be created using any of a variety of revision control systems. Note that for mercurial and bzr, the srcdir is converted…
ikiwiki-calendar – create calendar archive pages Synopsisikiwiki-calendar [-f] your.setup [pagespec] [startyear [endyear]] Descriptionikiwiki-calendar creates pages that use the ikiwiki/directive/calendar directive, allowing the archives to be browsed one month at a time, with calendar-based navigation. You must specify the setup file for your wiki. The pages will be created inside its srcdir, beneath the archivebase directory…
ike-scan – Discover and fingerprint IKE hosts (IPsec VPN servers) Synopsisike-scan [options] [hosts…] Target hosts must be specified on the command line unless the –file option is specified. Descriptionike-scan discovers IKE hosts and can also fingerprint them using the retransmission backoff pattern. ike-scan does two things: 1) Discovery: Determine which hosts are running IKE. This…
ijsgutenprint – Ghostscript driver for Gutenprint Synopsisgs -sDEVICE=ijs -sIjsServer=/usr/bin/ijsgutenprint -sDeviceManufacturer=vendor -sDeviceModel=name [ -dIjsUseOutputFD ] -sIjsParams=[ key1=value1,keyn=valuen… ] [ options ] [ files ] Descriptionijsgutenprint provides Ghostscript with a Gutenprint driver, supporting all printers supported by libgutenprint. NOTE: ijsgutenprint should never be called directly. Ghostscript will run it if the IjsServer parameter is set to IjsServer=ijsgutenprint…
ijsgutenprint – Ghostscript driver for Gutenprint Synopsisgs -sDEVICE=ijs -sIjsServer=/usr/bin/ijsgutenprint -sDeviceManufacturer=vendor -sDeviceModel=name [ -dIjsUseOutputFD ] -sIjsParams=[ key1=value1,keyn=valuen… ] [ options ] [ files ] Descriptionijsgutenprint provides Ghostscript with a Gutenprint driver, supporting all printers supported by libgutenprint. NOTE: ijsgutenprint should never be called directly. Ghostscript will run it if the IjsServer parameter is set to IjsServer=ijsgutenprint…
ijs-config – script to get information about the installed version of ijs Synopsisijs-config [–prefix[=DIR]] [–exec-prefix[=DIR]] [–version] [–libs] [–cflags] Descriptionijs-config is a program that is used to determine the compiler and linker flags that should be used to compile and link programs that use IJS. OptionsThis program follows the usual GNU command line syntax, with long…
igawk – gawk with include files Synopsisigawk [ all gawk options ] -f program-file [ — ] file … igawk [ all gawk options ] [ — ] program-text file … DescriptionIgawk is a simple shell script that adds the ability to have “include files” to gawk(1). AWK programs for igawk are the same as…
ifuse – Mount directories of an iOS device locally using fuse. Synopsisifuse MOUNTPOINT [OPTIONS] DescriptionMount directories of an iOS device locally using fuse. By default the media directory is mounted, options allow to also mount the sandbox container of an app, an app’s documents folder or even the root filesystem on jailbroken devices. Example: $…
ift-extract.info – ift-extract.info Built-in iSight firmware extractor and patcherift-extract extract the Built-in iSight firmware from Apple driver and patch it to avoid some bugs in it. The firmware is then ready to get loaded into the chip using ift-load. * Menu: Finding the Apple driver: see “Driver” Command line options: see “Options” See also “Copying”…
ift-export.info – ift-export.info Built-in iSight firmware exportift-export export a Built-in iSight firmware produced by ift-extract and convert it to Intel HEX file. Note that Apple Built-in iSight seems to have extende on-chip memory. This case is not handled by fxload and thus, not allowing to load the Intel HEX file into the chip. Use ift-load…
ifstat – Report InterFace STATistics Synopsisifstat [-a] [-l] [-z] [-n] [-v] [-h] [-t] [-i if0,if1,…] [-d drv[:opt]] [-s [comm@][#]host[/nn]] [-T] [-A] [-w] [-W] [-S] [-b] [-q] [delay[/delay] [count]] DescriptionIfstat is a little tool to report interface activity, just like iostat/vmstat do for other system statistics. Optionsifstat accepts the following options: -l Enables monitoring of loopback…
ifne – Run command if the standard input is not empty Synopsis ifne [-n] commandDescriptionifne runs the following command if and only if the standard input is not empty. Options-n Reverse operation. Run the command if the standard input is empty. Note that if the standard input is not empty, it is passed through ifne…
ifnames – Extract CPP conditionals from a set of files Synopsisifnames [,OPTION/]… [,FILE/]… DescriptionScan all of the C source FILES (or the standard input, if none are given) and write to the standard output a sorted list of all the identifiers that appear in those files in ‘#if’, ‘#elif’, ‘#ifdef’, or ‘#ifndef’ directives. Print each…
IFM – Interactive Fiction Mapper Synopsisifm [options] [file…] DescriptionIFM is a program for keeping track of your progress through an Interactive Fiction game. You can record each room you visit and its relation to other rooms, the initial locations of useful items you find, and the tasks you need to perform in order to solve…
ifind – Find the meta-data structure that has allocated a given disk unit or file name. Synopsisifind [-avVl] [-f fstype] [-d data_unit] [-n file] [-p par_inode] [-z ZONE] [-i imgtype] [-o imgoffset] [-b dev_sector_size] image [images] Descriptionifind finds the meta-data structure that has data_unit allocated a data unit or has a given file name. In…
ifdata – get network interface info without parsing ifconfig output Synopsis ifdata [options] {iface}Descriptionifdata can be used to check for the existence of a network interface, or to get information about the interface, such as its IP address. Unlike ifconfig or ip, ifdata has simple to parse output that is designed to be easily used…
if – conditionally execute a command Synopsisif CONDITION; COMMANDS_TRUE…; [else; COMMANDS_FALSE…;] end Descriptionif will execute the command CONDITION. If the condition’s exit status is 0, the commands COMMANDS_TRUE will execute. If the exit status is not 0 and else is given, COMMANDS_FALSE will be executed. In order to use the exit status of multiple commands…
ietf2datebook – Converts IETF agenda format to install-datebook format Sectionpilot-link: Tools Synopsis ietf2datebook < ietf-agenda > datebook.txt Description ietf2datebook is a Perl script that converts IETF (http://www.ietf.org) agenda to format suitable for the install-datebook program. The agenda file is given to it as standard input and the output file is sent to standard output. Please remove all headers and footers from the agenda file before giving…