NAME byobu-export – DEPRECATED SYNOPSIS byobu-export DESCRIPTION The byobu-export utility is now deprecated. To install byobu on a system for which byobu is not packaged, or where you are not the root user, simply: * Download the latest release (>= 3.0) from: https://launchpad.net/byobu/+download * And follow the instructions in the README AUTHOR This manpage and the utility were written by…
NAME byobu-enable, byobu-disable – wrapper script for enabling/disabling automatic startup of byobu after login into text console SYNOPSIS byobu-enable byobu-disable DESCRIPTION byobu-enable will do two things: 1) run byobu-launcher-install(1) to configure byobu(1) to launch automatically on login 2) then launch byobu(1) byobu-disable will simply run byobu-launcher-uninstall(1). BUGS None found, yet. SEE ALSO screen(1), byobu-config(1), byobu-export(1), byobu-status(1), byobu-status-detail(1) http://byobu.co AUTHOR This manpage was…
NAME byobu-prompt, byobu-enable-prompt, byobu-disable-prompt – add and remove a nice color prompt to your shell configuration SYNOPSIS byobu-prompt byobu-enable-prompt byobu-disable-prompt DESCRIPTION Byobu provides a special PS1 prompt command, compatible with Bash shells. It will display the previous command’s exit code, if it’s not zero. It will use 3 separate colors for the local username, hostname,…
NAME byobu-enable, byobu-disable – wrapper script for enabling/disabling automatic startup of byobu after login into text console SYNOPSIS byobu-enable byobu-disable DESCRIPTION byobu-enable will do two things: 1) run byobu-launcher-install(1) to configure byobu(1) to launch automatically on login 2) then launch byobu(1) byobu-disable will simply run byobu-launcher-uninstall(1). BUGS None found, yet. SEE ALSO screen(1), byobu-config(1), byobu-export(1), byobu-status(1), byobu-status-detail(1) http://byobu.co AUTHOR This manpage was…
NAME byobu-prompt, byobu-enable-prompt, byobu-disable-prompt – add and remove a nice color prompt to your shell configuration SYNOPSIS byobu-prompt byobu-enable-prompt byobu-disable-prompt DESCRIPTION Byobu provides a special PS1 prompt command, compatible with Bash shells. It will display the previous command’s exit code, if it’s not zero. It will use 3 separate colors for the local username, hostname,…
NAME byobu-ctrl-a – Configure Byobu’s ctrl-a behavior DESCRIPTION byobu-ctrl-a is an interactive program that allows a user to configure the behavior of the ‘ctrl-a’ key sequence. Traditional GNU screen(1) uses ctrl-a as its escape character, while GNU emacs(1) uses ctrl-a to move the cursor to the beginning of the line. This conflict has caused unending…
NAME byobu-config – Configuration utility for byobu DESCRIPTION byobu-config is an application that can configure a number of options available in the byobu utility. The menu provided by the byobu should be self-explanatory. SEE ALSO screen(1) http://byobu.co AUTHOR This manpage and the utility were written by Dustin Kirkland <kirkland [at] byobu.co> for Ubuntu systems (but…
NAME bximage – Interactive Disk Image Creator for Bochs SYNOPSIS bximage [options] [filename] DESCRIPTION Bximage is an easy to use console based tool for creating disk images, particularly for use with Bochs. It is completely interactive if no command line arguments are used. It can be switched to a non-interactive mode if all required parameters…
NAME bxcommit – Interactive Tool to Commit Redologs into flat Disk Images for Bochs USAGE bxcommit DESCRIPTION Bxcommit is an easy to use console based tool for committing redologs into flat disk images, particularly for use with Bochs. It is completely interactive, so no command line arguments are needed to use bxcommit. LICENSE This program…
NAME bwrap – container setup utility SYNOPSIS bwrap [OPTION…] [COMMAND] DESCRIPTION bwrap is a privileged helper for container setup. You are unlikely to use it directly from the commandline, although that is possible. It works by creating a new, completely empty, filesystem namespace where the root is on a tmpfs that is invisible from the…
NAME bwm-ng – Bandwidth Monitor NG (Next Generation), a live bandwidth monitor for network and disk io. SYNOPSIS bwm-ng [options] … [configfile] DESCRIPTION bwm-ng can be used to monitor the current bandwidth of all or some specific network interfaces or disks (or partitions). It shows total of in and out as well as total of…
NAME bwa – Burrows-Wheeler Alignment Tool SYNOPSIS bwa index ref.fa bwa mem ref.fa reads.fq > aln-se.sam bwa mem ref.fa read1.fq read2.fq > aln-pe.sam bwa aln ref.fa short_read.fq > aln_sa.sai bwa samse ref.fa aln_sa.sai short_read.fq > aln-se.sam bwa sampe ref.fa aln_sa1.sai aln_sa2.sai read1.fq read2.fq > aln-pe.sam bwa bwasw ref.fa long_read.fq > aln.sam DESCRIPTION BWA is a…
NAME BusyBox – The Swiss Army Knife of Embedded Linux SYNTAX busybox<applet>[arguments…] # or <applet>[arguments…] #if symlinked DESCRIPTION BusyBox combines tiny versions of many common UNIX utilities into a single small executable. It provides minimalist replacements for most of the utilities you usually find in GNU coreutils, util-linux, etc. The utilities in BusyBox generally have…
NAME busctl – Introspect the bus SYNOPSIS busctl [OPTIONS…] [COMMAND] [NAME…] DESCRIPTION busctl may be used to introspect and monitor the D-Bus bus. COMMANDS The following commands are understood: list Show all peers on the bus, by their service names. By default, shows both unique and well-known names, but this may be changed with the…
NAME burst – explode digests into messages SYNOPSIS burst [+folder] [msgs] [-inplace | -noinplace] [-mime | -nomime] [-automime] [-quiet | -noquiet] [-verbose | -noverbose] [-version] [-help] DESCRIPTION Burst considers the specified messages in the named folder to be Internet digests, and explodes them in that folder. If -inplace is given, each digest is replaced by…
NAME bzip2, bunzip2 – a block-sorting file compressor, v1.0.8 bzcat – decompresses files to stdout bzip2recover – recovers data from damaged bzip2 files SYNOPSIS bzip2 [ -cdfkqstvzVL123456789 ] [ filenames … ] bzip2 [ -h|–help ] bunzip2 [ -fkvsVL ] [ filenames … ] bunzip2 [ -h|–help ] bzcat [ -s ] [ filenames ……
NAME bundledoc – bundle all the files needed by a LaTeX document SYNOPSIS bundledoc [–version] [–help] [—[no]verbose] [–texfile=file.tex] [–directory=directory] [—[no]localonly] [–exclude=string] [–include=filespec] [–manifest=file] [—listdeps=[yes|no|only|rel]…] [—[no]keepdirs] [–config=file.cfg] file.dep DESCRIPTION bundledoc is a post-processor for the snapshot package that bundles together all the classes, packages, and files needed to build a given LaTeX document. It reads the…
bundle – Ruby Dependency Management Synopsisbundle COMMAND [–no-color] [–verbose] [ARGS] DescriptionBundler manages an application’s dependencies through its entire life across many machines systematically and repeatably. See the bundler website https://bundler.io for information on getting started, and Gemfile(5) for more information on the Gemfile format. Options–no-color Print all output without color –retry, -r Specify the number…
bundle-viz – Generates a visual dependency graph for your Gemfile Synopsisbundle viz [–file=FILE] [–format=FORMAT] [–requirements] [–version] [–without=GROUP GROUP] Descriptionviz generates a PNG file of the current Gemfile(5) as a dependency graph. viz requires the ruby-graphviz gem (and its dependencies). The associated gems must also be installed via bundle install(1) bundle-install.1.html. Options–file, -f The name to…
bundle-update – Update your gems to the latest available versions Synopsisbundle update *gems [–all] [–group=NAME] [–source=NAME] [–local] [–ruby] [–bundler[=VERSION]] [–full-index] [–jobs=JOBS] [–quiet] [–patch|–minor|–major] [–redownload] [–strict] [–conservative] DescriptionUpdate the gems specified (all gems, if –all flag is used), ignoring the previously installed gems specified in the Gemfile.lock. In general, you should use bundle install(1) bundle-install.1.html to…