NAME asciitopgm – convert ASCII graphics into a portable graymap SYNOPSIS asciitopgm [-d divisor] height width [asciifile] DESCRIPTION Reads ASCII data as input. Produces a portable graymap with pixel values which are an approximation of the "brightness" of the ASCII characters, assuming black-on-white printing. In other words, a capital M is very dark, a period…
NAME asciinema – terminal session recorder SYNOPSIS asciinema [-h] [–version] command [<args>] DESCRIPTION Terminal session recorder and the best companion of asciinema.org service. asciinema is composed of multiple commands, similar to git, apt-get or brew. When you run asciinema with no arguments help messages is displayed, listing all available commands with their options. OPTIONS -h,…
NAME asciidoc – converts an AsciiDoc text file to HTML or DocBook SYNOPSIS asciidoc [OPTIONS] FILE DESCRIPTION The asciidoc(1) command translates the AsciiDoc text file FILE to DocBook or HTML. If FILE is – then the standard input is used. OPTIONS -a, –attribute=ATTRIBUTE Define or delete document attribute. ATTRIBUTE is formatted like NAME=VALUE. Command-line attributes…
NAME ascii – report character aliases SYNOPSIS ascii [-dxohv] [-t] [char-alias…] OPTIONS Called with no options, ascii behaves like `ascii -h’. Options are as follows: -t Script-friendly mode, emits only ISO/decimal/hex/octal/binary encodings of the character. -s Parse multiple characters. Convenient way of parsing strings. -d Ascii table in decimal. -x Ascii table in hex. -o…
NAME ascii-xfr – upload/download files using the ASCII protocol SYNOPSIS ascii-xfr -s|-r [-ednv] [-l linedelay] [-c characterdelay] filename DESCRIPTION Ascii-xfr Transfers files in ASCII mode. This means no flow control, no checksumming and no file-name negotiation. It should only be used if the remote system doesn’t understand anything else. The ASCII protocol transfers files line-by-line….
NAME asa – convert ASA (Fortran) carriage control charachters SYNOPSIS asa [file…] DESCRIPTION asa reads text with ASA cariage control characters from the files specified as its command arguments, or standard input if none are specified, and converts them into line printer control sequences. These control characters are traditionally used in Fortran programs. The first…
NAME as86 – Assembler for 8086..80386 processors SYNOPSIS as86 [-0123agjuw] [-lm[list]] [-n name] [-o obj] [-b[bin]] [-s sym] [-t textseg] src as86_encap prog.s prog.v [prefix_] [as86_options] DESCRIPTION as86 is an assembler for the 8086..80386 processors, it’s syntax is closer to the intel/microsoft form rather than the more normal generic form of the unix system assembler….
NAME AS – the portable GNU assembler. SYNOPSIS as [-a[cdghlns][=file]] [–alternate] [-D] [–compress-debug-sections] [–nocompress-debug-sections] [–debug-prefix-map old=new] [–defsym sym=val] [-f] [-g] [–gstabs] [–gstabs+] [–gdwarf-<N>] [–gdwarf-sections] [–gdwarf-cie-version=VERSION] [–help] [-I dir] [-J] [-K] [-L] [–listing-lhs-width=NUM] [–listing-lhs-width2=NUM] [–listing-rhs-width=NUM] [–listing-cont-lines=NUM] [–keep-locals] [–no-pad-sections] [-o objfile] [-R] [–statistics] [-v] [-version] [–version] [-W] [–warn] [–fatal-warnings] [-w] [-x] [-Z] [@FILE] [–sectname-subst] [–size-check=[error|warning]] [–elf-stt-common=[no|yes]] [–generate-missing-build-notes=[no|yes]] [–multibyte-handling=[allow|warn|warn-sym-only]] [–target-help] [target-options] [—|files …] TARGET Target AArch64 options: [-EB|-EL] [-mabi=ABI] Target Alpha options: [-mcpu] [-mdebug | -no-mdebug] [-replace | -noreplace] [-relax] [-g] [-Gsize] [-F] [-32addr] Target ARC options: [-mcpu=cpu] [-mA6|-mARC600|-mARC601|-mA7|-mARC700|-mEM|-mHS] [-mcode-density] [-mrelax] [-EB|-EL]…
NAME Artha – An cross-platform thesaurus based on WordNet DESCRIPTION Artha is an open thesaurus based on the WordNet database, created with simplicity in mind. Once executed, Artha monitors for a user preset global hotkey combination. When the user selects some text in any window, and presses this hotkey combo, Artha looks up WordNet thesaurus…
NAME rancid – Cisco configuration filter SYNOPSIS rancid [-dlCV] [-t device_type] (-f filename | hostname) rancid [-dhlCV] -t device_type (-f filename | hostname) DESCRIPTION rancid is a collection of perl(1) scripts which uses the login scripts (see clogin(1)) to login to a device, execute commands to display the configuration, etc, then filters the output for…
NAME arpaname – translate IP addresses to the corresponding ARPA names SYNOPSIS arpaname {ipaddress …} DESCRIPTION arpaname translates IP addresses (IPv4 and IPv6) to the corresponding IN-ADDR.ARPA or IP6.ARPA names. SEE ALSO BIND 9 Administrator Reference Manual. AUTHOR Internet Systems Consortium COPYRIGHT Copyright © 2009 Internet Systems Consortium, Inc. ("ISC") Index
NAME arp-scan – The ARP scanner SYNOPSIS arp-scan [options] [hosts…] Target hosts must be specified on the command line unless the –file option is given, in which case the targets are read from the specified file instead, or the –localnet option is used, in which case the targets are generated from the network interface IP…
NAME arp-fingerprint – Fingerprint a system using ARP SYNOPSIS arp-fingerprint [options] target The target should be specified as a single IP address or hostname. You cannot specify multiple targets, IP networks or ranges. If you use an IP address for the target, you can use the -o option to pass the –numeric option to arp-scan,…
NAME Arora – Lightweight web browser based on Qt and WebKit SYNOPSIS arora [Qt options] [url] DESCRIPTION Arora is a lightweight, cross-platform web browser using the Qt 4.4 port of the WebKit layout engine. It is based on the demo browser application shipped with Qt demos. OPTIONS Common Qt Options -style style, -style=style Specify the…
NAME arora-placesimport – a tool for importing browser history from Firefox 3 and up SYNOPSIS arora-placesinfo ~/.mozilla/firefox/[profile-dir]/places.sqlite DESCRIPTION htmlToXBel is a tool for importing browser history from Firefox 3 and up. BUGS Please report bugs to http://code.google.com/p/arora/issues/list. AUTHOR The author of htmlToXBel is Benjamin C. Meyer <ben [at] meyerhome.net>. This manual page was written by…
NAME arora-cacheinfo – a tool for extracting files and metadata out of Arora cache files. SYNOPSIS arora-cacheinfo [-o cachefile] [file | url] DESCRIPTION Arora-cacheinfo is a tool for extracting files and displaying metadata out of an Arora cache files that are stored on the disk. Every cache file contains both the cached file (sometimes compressed)…
NAME arm4_report – report on ARM 4 transactions SYNOPSIS arm4_report –help|-h arm4_report –version|-V arm4_report [[–summary|-s] | [–detailed|-d]] [–config|-C config_file] [–archive|-a archive_directory] WARNING This program is deprecated and may not exist in a future release DESCRIPTION The arm4_report program is a simple reporting interface to the ARM 4 transaction database. Two types of reports are available. The…
NAME arm4_export – export the ARM 4 database in XML format SYNOPSIS arm4_export –help|-h arm4_export –version|-V arm4_export [–config|-C config_file] [–archive|-a archive_directory] DESCRIPTION The arm4_export program exports the ARM 4 agent database to XML. This can then be used to archive the data or to facilitate conversion from one database type to another, or for upgrading…
NAME arm4_dump – dump the ARM 4 database SYNOPSIS arm4_dump –help|-h arm4_dump –version|-V arm4_dump [–config|-C config_file] [–archive|-a archive_directory] DESCRIPTION The arm4_dump program dumps the ARM 4 agent database in a human readable format. It is intended primarily as a debugging tool and not as a user tool. OPTIONS -h, –help display the command line options….
NAME arm4_daemon – ARM 4 collection agent SYNOPSIS arm4_daemon –help|-h arm4_daemon –version|-V arm4_daemon [–verbose|-v] [–debug|-d] [–config|-C config_file] [–stats|-s] [–off|-o] DESCRIPTION The arm4_daemon program collects ARM 4 measurement data from the ARM 4 libraries and saves the measurements in a local database. While there will normally be many instances of the instrumented applications, there will typically be…