This document covers the Linux v0.95a root diskette release from March 17, 1992. It documents the changes between v0.95/0.12 and v0.95a. For context on the base 0.95 release, read RELNOTES-0.95 first — this only covers the delta. Changes to the Root Diskette Shell replacement: bash → ash Bash was replaced with ash, the BSD 4.3…
This document preserves the historical release notes for Linux v0.95 (March 7, 1992), one of the earliest public kernel versions. These notes provide valuable insight into early Linux development decisions and technical challenges. The original notes are presented here with minor formatting improvements for readability. Copyright Linux 0.95 is copyrighted under the GNU General Public…
Linux v0.12 is a historical kernel release from the early days of Linux development. This document preserves the original release notes with minimal modifications to improve readability and accuracy. These notes are primarily of archaeological interest to those studying early Linux kernel history. Copyright The Linux copyright was updated to conform with the GNU General…
Expanding a VM’s storage is a routine operation in KVM environments. The process has two distinct phases: expanding the raw disk capacity and then growing the partitions and filesystems to use that space. Resizing the Disk Image The first step is to increase the virtual disk size using qemu-img: qemu-img resize disk.qcow2 +10G This adds…
By default, parted displays partition boundaries in bytes. To view start and end positions in sectors instead, you need to set the unit explicitly using the unit command. Using the unit command The unit subcommand in parted sets the display unit for locations and sizes. The syntax is straightforward: parted /dev/sda unit s print The…
On Linux systems, the root filesystem (/) can be on various device types — a raw disk partition, an LVM logical volume, or other storage configurations. Finding the underlying physical disk requires checking the device hierarchy, which differs depending on the storage setup. Quick method with df and lsblk The simplest approach uses lsblk with…
When you try to create a filesystem on a disk with mkfs, you may see this error: # mkfs -t ext4 /dev/sdd1 mke2fs 1.42.8 (20-Jun-2013) /dev/sdd1 is apparently in use by the system; will not make a filesystem here! Even though the device isn’t mounted, mkfs refuses to proceed. This safety mechanism prevents accidental data…
fdisk -l displays partition information in sectors by default, which isn’t practical for most sysadmin tasks. While fdisk itself lacks options to change the unit display, parted shows partition sizes in GB/MB/KB automatically and is the better tool for this job. Using parted for readable partition output Run parted with the -l flag to list…
When you install Fedora (or other Linux distributions) alongside Windows on a UEFI system, GRUB sometimes fails to generate a functional boot entry for Windows. The symptom is a missing or non-working “Windows Boot Manager” entry in the GRUB menu, or GRUB drops you to a shell prompt when you select it. Why This Happens…
There are times when you need direct access to a DomU’s disk from Dom0—for recovery, backup, or maintenance. This is straightforward with Xen’s block device tools, though the commands have evolved depending on your Xen version. Attaching the Disk The method depends on which Xen toolstack you’re using. With xl (Xen 4.1+, recommended): xl block-attach…
Swap space is essential for system stability, allowing the kernel to move less-frequently-used memory pages to disk when physical RAM is exhausted. Here’s how to set up a dedicated swap partition. Step 1: Create the Partition Use fdisk, gdisk (for GPT disks), or parted to create a new partition. For modern systems with GPT partition…
Linux can manage multiple swap partitions or files simultaneously, each with an assigned priority. The kernel allocates swap pages from highest to lowest priority, with round-robin allocation among equally-prioritized areas. Setting Swap Priority with swapon Use the swapon command to activate a swap partition and set its priority: swapon -p 10 /dev/sdc1 The -p flag…
When you repurpose disks from one RAID array to another system, Linux keeps the old RAID metadata intact as a safety measure. This prevents accidental data corruption, but it also blocks you from reusing the disk until the signatures are cleared. RAID metadata isn’t stored in one place — it’s scattered across the disk by…
Shrinking an ext4 filesystem on LVM is riskier than expanding—it requires the filesystem offline and careful size planning. The operation can take hours on large volumes, and mistakes can destroy data. This guide walks through the safe path with verification at each step. Prerequisites Before starting: Backup everything. A full backup of the data being…
GPT (GUID Partition Table) is required for disks larger than 2TB. The older MBR format maxes out at 2.2TB due to 32-bit sector addressing. Tools like fdisk will refuse to work properly with large drives and recommend switching to GPT. While parted has a steeper learning curve than some alternatives, it’s the standard for GPT…
LVM abstracts physical storage into logical volumes, letting you resize filesystems online, add drives transparently, and manage capacity without downtime. This guide covers the most common task: extending a mounted ext4 filesystem when you need more space. Prerequisites Online extension requires the resize_inode option enabled on your ext4 filesystem. Check this first: tune2fs -l /dev/vg/lv_home…
Use fdisk or parted to create a new partition. parted is generally preferred for modern systems as it handles larger disks better: # parted /dev/sdd (parted) mklabel gpt (parted) mkpart primary 0% 100% (parted) quit Or with fdisk for MBR-based systems: # fdisk /dev/sdd Then: Press n to create a new partition Press p for…
LVM (Logical Volume Manager) lets you combine multiple physical disks into flexible storage pools. This guide covers creating a volume group from multiple disk partitions—a common setup for servers that need flexible storage allocation across Xen guests, databases, or other demanding workloads. Prerequisites This assumes you have two or more unformatted disk devices available. In…