Section 8: administration and privileged commands
iwspy – Get wireless statistics from specific nodes Synopsis iwspy [interface] iwspy interface [+] DNSNAME | IPADDR | HWADDR […] iwspy interface off iwspy interface setthr low high iwspy interface getthr Description Iwspy is used to set a list of addresses to monitor in a wireless network interface and to read back quality of link…
iwpriv – configure optionals (private) parameters of a wireless network interface Synopsis iwpriv [interface] iwpriv interface private-command [private-parameters] iwpriv interface private-command [I] [private-parameters] iwpriv interface –all Description Iwpriv is the companion tool to iwconfig(8). Iwpriv deals with parameters and setting specific to each driver (as opposed to iwconfig which deals with generic ones). Without any…
iwlist – Get more detailed wireless information from a wireless interface Synopsis iwlist [interface] scanning iwlist [interface] frequency iwlist [interface] rate iwlist [interface] keys iwlist [interface] power iwlist [interface] txpower iwlist [interface] retry iwlist [interface] event iwlist [interface] auth iwlist [interface] wpakeys iwlist [interface] genie iwlist [interface] modulation iwlist –help iwlist –version Description Iwlist is…
iwhd_selinux – Security Enhanced Linux Policy for the iwhd processes Description Security-Enhanced Linux secures the iwhd processes via flexible mandatory access control. The iwhd processes execute with the iwhd_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
iwgetid – Report ESSID, NWID or AP/Cell Address of wireless network Synopsis iwgetid [interface] [–raw] [–scheme] [–ap] [–freq] [–mode] [–protocol] [–channel] Description iwgetid is used to find out the NWID, ESSID or AP/Cell Address of the wireless network that is currently used. The information reported is the same as the one shown by iwconfig, but…
iwevent – Display Wireless Events generated by drivers and setting changes Synopsis iwevent Description iwevent displays Wireless Events received through the RTNetlink socket. Each line displays the specific Wireless Event which describes what has happened on the specified wireless interface. This command doesn’t take any arguments. Display There are two classes of Wireless Events. The…
ipmiutil_wdt- display and set WatchDog Timer parameters Synopsis ipmiutil wdt [-acdelrtx -N node -P/-R pswd -U user -EFJTVY] Description ipmiutil wdt is a program that uses IPMI commands to display and set WatchDog Timer parameters. This utility can use either any available IPMI driver, or direct user-space IOs, or the IPMI LAN interface if -N….
iwconfig – configure a wireless network interface Synopsis iwconfig [interface] iwconfig interface [essid X] [nwid N] [mode M] [freq F] [channel C][sens S ][ap A ][nick NN ] [rate R] [rts RT] [frag FT] [txpower T] [enc E] [key K] [power P] [retry R] [modu M] [commit] iwconfig –help iwconfig –version Description Iwconfig is similar…
iw – show / manipulate wireless devices and their configuration Synopsis iw [ OPTIONS ] { help [ command ] | OBJECT COMMAND } OBJECT := { dev | phy | reg } OPTIONS := { –version | –debug } Options –version print version information and exit. –debug enable netlink message debugging. Iw – Command…
ivtscd – driver for the IVT Solar Controller Device Note This man page only documents the hardware-specific features of the ivtscd driver. For information about the core driver, see nutupsdrv(8). Description This driver allows to access the IVT SCD-series devices. Extra Arguments This driver does not support any extra argument. Author Arjen de Korte <adkorte-guest…
iucode_tool – Tool to manipulate Intel® IA-32/X86-64 microcode bundles Synopsis iucode_tool [options] [[-ttype] filename|dirname] … Description iucode_tool is an utility that can load Intel® processor microcode data from files in both text and binary microcode bundle formats. It can output a list of the microcodes in these files, merge them, upload them to the kernel…
iucode_tool – Tool to manipulate Intel® IA-32/X86-64 microcode bundles Synopsis iucode_tool [options] [[-ttype] filename|dirname] … Description iucode_tool is an utility that can load Intel® processor microcode data from files in both text and binary microcode bundle formats. It can output a list of the microcodes in these files, merge them, upload them to the kernel…
ipmiutil_tsol – Tyan IPMIv1.5 Serial-Over-LAN Console application Synopsis ipmiutil tsol [recvip] [port=NUM] [ro|rw] [rows=NUM] [cols=NUM] [altterm] Description This command allows Serial-over-LAN sessions to be established with Tyan IPMIv1.5 SMDC such as the M3289 or M3290. The default command run with no arguments will establish default SOL session back to local IP address. Optional arguments may…
ipmiutil_sunoem – OEM commands for Sun servers Synopsis ipmiutil sunoem [-mx -NPRUEFJTVY] commands Description ipmiutil sunoem commands is a program that uses Sun OEM IPMI commands to perform platform-specific functions. Options -m 002000 Show FRU for a specific MC (e.g. bus 00, sa 20, lun 00). This could be used for PICMG or ATCA blade…
ispell-autobuildhash – Autobuilding the ispell hash file for some dicts Synopsis ispell-autobuildhash [–force] Options: –debug Show some extra ispell-autobuildhash information. –dry-run Show what would be done, but do nothing real. –force Rebuild the hash file for all dicts providing a compat file skipping the test. –triggered Tell the script that is run in the triggers…
isosize – output the length of an iso9660 filesystem Synopsis isosize [options] iso9660_image_file Description This command outputs the length of an iso9660 filesystem that is contained in the specified file. This file may be a normal file or a block device (e.g. /dev/hdd or /dev/sr0). In the absence of any options (and errors), it will…
ipmiutil_sol – an IPMI Serial-Over-LAN Console application Synopsis ipmiutil sol [-acdeilorsvwxz -NUPREFJTVY] Description This utility starts an IPMI Serial-Over-LAN console session. A Serial-over-LAN console allows the client to see and modify functions before the OS boots, such as BIOS setup, grub, etc. This utility uses either the IPMI LAN 1.5 or 2.0 SOL interface. The…
Pacemaker – Part of the Pacemaker cluster resource manager Synopsis iso8601 command [output modifier] Description iso8601 – Display and parse ISO8601 dates and times Options -?, –help This text -$, –version Version information -V, –verbose Increase debug output Commands: -n, –now Display the current date/time -d, –date=value Parse an ISO8601 date/time. Eg. ‘2005-01-20 00:30:00 +01:00’…
isnsdd – iSNS discovery daemon Synopsis isnsdd [-f] [-c filename] [-d debug-facility] Description Isnsdd is a client side daemon for iSNS. It registers storage nodes and portals with the iSNS service, and refreshes these registrations in a timely manner. The daemon also registers itself to receive SCN notifications, and processes these. It can be configured…
isnsd_selinux – Security Enhanced Linux Policy for the isnsd processes Description Security-Enhanced Linux secures the isnsd processes via flexible mandatory access control. The isnsd processes execute with the isnsd_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…