Section 8: administration and privileged commands
isnsd – iSNS server daemon Synopsis isnsd [-f] [-4] [-6] [-c filename] [-d debug-facility] [–dump-db] [–init] Description Isnsd implements the iSNS protocol as defined in RFC 4171. iSNS is a discovery protocol for iSCSI and iFCP. Options By default, isnsd will take most of its settings from the configuration file /etc/isns/isnsd.conf, with the exception of…
isnsadm – iSNS client utility Synopsis isnsadm [options…] –register object… isnsadm […] –query attr[=value] isnsadm […] –deregister attr=value isnsadm […] –list type attr=value isnsadm […] –dd-register attr=value isnsadm […] –enroll client-name attr=value isnsadm […] –edit-policy attr=value Description Isnsadm is a command line utility for interacting with an iSNS server. It operates in one of several…
ipmiutil_smcoem – OEM commands for SuperMicro servers Synopsis ipmiutil smcoem [-mx -NPRUEFJTVY] commands Description ipmiutil smcoem is a function that uses SuperMicro OEM IPMI commands to perform platform-specific functions. Options -m 002000 Show FRU for a specific MC (e.g. bus 00, sa 20, lun 00). This could be used for PICMG or ATCA blade systems….
isisd – an IS-IS routing engine for use with Quagga routing software. Synopsis isisd [ -dhv ] [ -f config-file ] [ -i pid-file ] [ -P port-number ] [ -A vty-address ] [ -u user ] [ -g group ] Description isisd is a routing component that works with the Quagga routing engine. Options…
ipmiutil_serial – configure a system for Serial/EMP management functions, such as Terminal Mode, and optionally share the port with the Serial Console. Synopsis ipmiutil serial [-bcdeflq#rsvxB -m0 -m1 -n ser_chan -u user -p passwd -NUPREFJTVY] Description ipmiutil serial is a program that uses an IPMI driver to send IPMI commands which configure a system to…
ipmiutil_sensor – show Sensor Data Records Synopsis ipmiutil sensor [-abcdefgjkmpqrstuvwxL -i id -n snum -h tval -l tval -NUPREFJTVY] Description ipmiutil sensor is a program that uses IPMI commands to show and decode Sensor Data Records and current sensor readings for all sensors in the system. This utility can use either the /dev/ipmi0 driver from…
ipmiutil_sel – show firmware System Event Log records Synopsis ipmiutil sel [-abcflswvx -N node -P/-R pswd -U user -EFJTVY] Description ipmiutil sel is a program that uses IPMI commands to to read and display the System Event Log (SEL) which is stored by the BMC firmware. IPMI commands are issued to read each record, and,…
isdnlog – isdn log system (and more) Description Isdnlog gets information from your isdn card, decodes this information, and can do anything with it, such as logging, starting programs, and more. All options to isdnlog can be given as command line flags, or you can specify a file with options (recommended). Restriction Isdnlog only works…
isdnctrl_conf – isdnctrl configuration writeconf file Writes the configuration into a file. If file is omitted, the default file /etc/isdn/isdn.conf will be used. readconf file Reads the configuration from a file. If file is omitted, the default file /etc/isdn/isdn.conf will be used. Syntax of the configuration file This syntax will be used for the options…
isdnctrl – get/set ISDN device information Synopsis isdnctrl action device … Description isdnctrl is used to create and delete network interfaces for ISDN, set up the various parameters and phone numbers for dial in and dial out. It is also used to list the current parameters of an already configured network interface. isdnctrl is not…
isdnctrl – get/set ISDN device information Synopsis isdnctrl action device … Description isdnctrl is used to create and delete network interfaces for ISDN, set up the various parameters and phone numbers for dial in and dial out. It is also used to list the current parameters of an already configured network interface. isdnctrl is not…
iscsiuio – iSCSI UserSpace I/O driver Synopsis iscsiuio [-d-f-v] Description iscsiuio is the UserSpace I/O driver for the QLogic NetXtreme II BCM5706/5708/5709 series PCI/PCI-X Gigabit Ethernet Network Interface Card (NIC) and for the QLogic NetXtreme II BCM57710/57711/57712/57800/57810/57840 series PCI-E 10 Gigabit Ethernet Network Interface Card. The driver has been tested on 2.6.28 kernels and above….
iscsistart – iSCSI boot tool Synopsis iscsistart [OPTION] Description iscsistart will start a session using the settings passed in, or using the iBFT or Open Firmware [OF] boot information. This program should not be run to manage sessions. Its primary use is to start sessions used for iSCSI root boot. Options [-i|–initiatorname=]name Set InitiatorName to…
iscsid_selinux – Security Enhanced Linux Policy for the iscsid processes Description Security-Enhanced Linux secures the iscsid processes via flexible mandatory access control. The iscsid processes execute with the iscsid_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
iscsid – Open-iSCSI daemon Synopsis iscsid [OPTION] Description The iscsid implements the control path of iSCSI protocol, plus some management facilities. For example, the daemon could be configured to automatically re-start discovery at startup, based on the contents of persistent iSCSI database. Options [-c|–config=]config-file Read configuration from config-file rather than the default /etc/iscsi/iscsid.conf file. [-i|–initiatorname=]iname-file…
iscsiadm – open-iscsi administration utility Synopsis iscsiadm -m discoverydb [-hV] [-d debug_level] [-P printlevel] [-I iface -t type -p ip:port [-lD] ] | [ [-p ip:port -t type] [-o operation] [-n name] [-v value] [-lD] ] iscsiadm -m discovery [-hV] [-d debug_level] [-P printlevel] [-I iface -t type -p ip:port [-l] ] | [ [-p ip:port] [-l|-D] ] iscsiadm -m node [-hV] [-d debug_level] [-P…
iscsi-target – service remote iSCSI requests Synopsis [-46DV ] [-b block length ] [-f configuration file ] [-p port number ] [-s maximum number of sessions ] [-t target name ] [-v verbose arg ] Description is the server for iSCSI requests from iSCSI initiators. listens for discovery and login requests on the required port,…
iscsi-iname – iSCSI initiator name generation tool Synopsis iscsi-iname [OPTION] Description iscsi-iname generates a unique iSCSI node name on every invocation. Options [-h|–help] Display help [-p=]prefix Use the prefix passed in instead of the default "iqn.2005-03.org.open-iscsi" Authors Open-iSCSI project <http://www.open-iscsi.com/> Mike Christie <mchristi [at] redhat.com>
isc-hmac-fixup – fixes HMAC keys generated by older versions of BIND Synopsis isc-hmac-fixup {algorithm} {secret} Description Versions of BIND 9 up to and including BIND 9.6 had a bug causing HMAC-SHA* TSIG keys which were longer than the digest length of the hash algorithm (i.e., SHA1 keys longer than 160 bits, SHA256 keys longer than…
isbmex – Driver for ISBMEX UPS equipment Note This man page only documents the hardware-specific features of the isbmex driver. For information about the core driver, see nutupsdrv(8). Supported Hardware This driver supports SOLA/BASIC Mexico ISBMEX protocol UPS equipment. Extra Arguments This driver does not support any extra settings in the ups.conf(5). Author Edscott Wilson…