Section 8: administration and privileged commands
isatapd – ISATAP IPv6 Router and Prefix Discovery Synopsis isatapd [OPTIONS] … [ADDRS] … Descripton isatapd implements the ISATAP IPv6 Router and Prefix Discovery procedures specified in Section 8.3 of [RFC5214]. It uses a Potential Router List (PRL) that records the IPv4 addresses of candidate default routers available on the ISATAP link. PRL discovery is…
isaset – set ISA registers Synopsis isaset [-y] [-W|-L] addrreg datareg address value [mask] #for I2C-like access isaset -f [-y] [-W|-L] address value [mask] #for flat address space Description isaset is a small helper program to set registers visible through the ISA bus. Options -f Enable flat address space mode. -y Disable interactive mode. By…
isadump – examine ISA registers Synopsis isadump [-y] [-W|-L] [-k V1,V2…] addrreg datareg [bank [bankreg]] #for I2C-like access isadump -f [-y] [-W|-L] address [range [bank [bankreg]]] #for flat address space Description isadump is a small helper program to examine registers visible through the ISA bus. It is intended to probe any chip that lives on…
irssi_selinux – Security Enhanced Linux Policy for the irssi processes Description Security-Enhanced Linux secures the irssi processes via flexible mandatory access control. The irssi processes execute with the irssi_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
irqbalance_selinux – Security Enhanced Linux Policy for the irqbalance processes Description Security-Enhanced Linux secures the irqbalance processes via flexible mandatory access control. The irqbalance processes execute with the irqbalance_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
irpsion5 – IrDA connectivity to a Psion V PDA Synopsis irpsion5 [ -s file ] [ -r ] [ -b ] [ -v ] [ -q ] [ -S ms ] [ -D n ] Options -s file send file to the Psion -r receive a file from the Psion -b receive multiple files (batch…
irnetd – Handle automatically incoming IrNET connections Synopsis irnetd [ppp-options] Description Irnetd is a very simple daemon automatically handling incoming IrNET connections. Every time a peer attempt to connect to the local computer, irnetd generates the relevant pppd(8) command to starts an IrNET server handling this peer. Parameters ppp-options Override the default pppd(8) options. These…
ipmiutil_reset – perform a hardware reset on the system Synopsis ipmiutil reset [-bcdDefhijmnoprsuwxy -N node -U user -P/-R pswd -EFJTVY] Description ipmiutil reset is a program that uses IPMI commands to perform a hardware reset of the chassis, or boot to a specific device. This utility can use either the /dev/ipmi0 driver from OpenIPMI, the…
irdaping – sends IrDA test frames Synopsis irdaping [ daddr ] [ -s framesize ] Options daddr … -s framesize … Description This is a program similar to ping(8). It sends IrDA test frames (added some userdata which contains the frame number and the time the frame was sent). You can change the size of…
irdadump – monitors the IrDA traffic on one or more links. Synopsis irdadump [ -b ] [ -c n ] [ -d ] [ -x ] [ -s n ] [ -t ] [ -l ] [ -v ] [ -i device ] Options -b dump bytes in columns -c n set snapcols for byte…
ircd – The IRCD-Hybrid Internet Relay Chat server Synopsis ircd [-configfile filename] [-dlinefile filename] [-klinefile filename] [-xlinefile filename] [-logfile filename] [-pidfile filename] [-foreground] [-version] Description ircd is the server (daemon) program for the Internet Relay Chat Program. The ircd is a server in that its function is to "serve" the client program irc(1) and other…
irc_selinux – Security Enhanced Linux Policy for the irc processes Description Security-Enhanced Linux secures the irc processes via flexible mandatory access control. The irc processes execute with the irc_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
irattach – binds the Linux-IrDA stack to a IrDA port Synopsis irattach [ <dev> ] [ -s ] [ -d dongle ] [ -v ] [ -h ] Description irattach binds the Linux-IrDA stack to an IrDA port. It configures the low level of the Linux-IrDA stack in the kernel. This step is usually necessary…
ipxd – IPX RIP/SAP daemon program Synopsis ipxd [ -d ] [ -p ] [ -l log_file ] [ -t ticks_file ] Description The IPX RIP/SAP daemon ipxd is invoked at boot time to manage the kernel IPX routing tables. When ipxd is started, it scans the file /proc/net/ipx_interfaces to find the ipx networks the…
ipx_route – add or delete IPX route Synopsis ipx_route add target_network router_network router_node ipx_route del target_network Description ipx_route adds or deletes an IPX route. The kernel IPX stores only one route per target network at a time. Options add This option is used to set up the route to a target network. del This option…
ipx_internal_net – add or delete the IPX internal network Synopsis ipx_internal_net add network_number node_number ipx_internal_net del Description ipx_internal_net adds or deletes the IPX internal network. An IPX internal network is a special kind of IPX interface that does not have a physical device or frame type. It is used to provide a route-independent address for…
ipx_interface – add, delete, or display an IPX interface Synopsis ipx_interface add [-p] device frame_type [network number[:node number]] ipx_interface del device frame_type ipx_interface delall ipx_interface check device frame_type ipx_interface help Description ipx_interface adds, deletes, or displays IPX interfaces depending on the option selected. An IPX interface is the item to which IPX sockets are bound….
ipx_configure – query/configure IPX behavior Synopsis ipx_configure [ –help | -h ] [ –auto_interface=on|off | -i on|off ] [ –auto_primary=on|off | -p on|off ] Description ipx_configure queries or configures IPX behavior with respect to automatic IPX interface detection. IPX can be configured to automatically create interfaces as they are detected. It can also be configured…
ipx_cmd – bridge between Novell’s SCMD driver and local IPX network Synopsis ipx_cmd -A server name [ -l local interface name ] Description ipx_cmd moves packets from tapN to server and vice versa. It is something like IPX Tunnel, but it uses Novell Netware 5 server Compatibility Mode Driver (AKA Migration Agent) on the other…
ipvsadm – Linux Virtual Server administration Synopsis ipvsadm -A|E -t|u|f service-address [-s scheduler] [-p [timeout]] [-M netmask] [-b sched-flags] ipvsadm -D -t|u|f service-address ipvsadm -C ipvsadm -R ipvsadm -S [-n] ipvsadm -a|e -t|u|f service-address -r server-address [-g|i|m] [-w weight] [-x upper] [-y lower] ipvsadm -d -t|u|f service-address -r server-address ipvsadm -L|l [options] ipvsadm…