The Linux Manuals (man pages) document is an important part of Linux documents. Linux Manuals are organized as several sections. Each section has a group of commands for a specific area in Linux usage, administration or development.
fence_ldom – Fence agent for Sun LDOM Description fence_ldom is an I/O Fencing agent which can be used with LDoms virtual machines. This agent works so, that run ldm command on host machine. So ldm must be directly runnable. Very useful parameter is -c (or cmd_prompt in stdin mode). This must be set to something,…
fence_kdump_send – send kdump acknowlegement message to cluster nodes Synopsis fence_kdump_send [OPTIONS]… [NODE]… Description fence_kdump_send is a utility used to send messages that acknowledge that the node has entered the kdump crash recovery service. This utility is intended to be used the the fence_kdump agent as a means detect that a failed node has entered…
fence_kdump – fencing agent for use with kdump crash recovery service Synopsis fence_kdump [OPTIONS]… Description fence_kdump is an I/O fencing agent to be used with the kdump crash recovery service. When the fence_kdump agent is invoked, it will listen for a message from the failed node that acknowledges that the failed node it executing the…
fence_ipmilan – Fence agent for IPMI fence_ilo3 – Fence agent for HP iLO3 (symlink) fence_ilo4 – Fence agent for HP iLO4 (symlink) fence_imm – Fence agent for IBM Integrated Management Module (symlink) fence_idrac – Fence agent for Dell iDRAC (symlink) Description fence_ipmilan is an I/O Fencing agentwhich can be used with machines controlled by IPMI.This…
fence_ipdu – Fence agent for iPDU over SNMP Description fence_ipdu is an I/O Fencing agent which can be used with the IBM iPDU network power switch. It logs into a device via SNMP and reboots a specified outlet. It supports SNMP v3 with all combinations of authenticity/privacy settings. fence_ipdu accepts options on the command line…
fence_intelmodular – Fence agent for Intel Modular Description fence_intelmodular is an I/O Fencing agent which can be used with Intel Modular device (tested on Intel MFSYS25, should work with MFSYS35 as well). Note: Since firmware update version 2.7, SNMP v2 write support is removed, and replaced by SNMP v3 support. So agent now has default…
fence_imm – Fence agent for IPMI fence_ilo3 – Fence agent for HP iLO3 (symlink) fence_ilo4 – Fence agent for HP iLO4 (symlink) fence_imm – Fence agent for IBM Integrated Management Module (symlink) fence_idrac – Fence agent for Dell iDRAC (symlink) Description fence_ipmilan is an I/O Fencing agentwhich can be used with machines controlled by IPMI.This…
fence_ilo_ssh – Fence agent for HP iLO over SSH fence_ilo3_ssh – Fence agent for HP iLO3 over SSH (symlink) fence_ilo4_ssh – Fence agent for HP iLO4 over SSH (symlink) Description fence_ilo_ssh is a fence agent that connects to iLO device. It logs into device via ssh and reboot a specified outlet. fence_ilo_ssh accepts options on…
fence_ilo_mp – Fence agent for HP iLO MP Description fence_ilo_mp accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_ilo_mp can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts….
fence_ilo_moonshot – Fence agent for HP Moonshot iLO Description fence_ilo_moonshot accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_ilo_moonshot can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts….
fence_ilo4_ssh – Fence agent for HP iLO over SSH fence_ilo3_ssh – Fence agent for HP iLO3 over SSH (symlink) fence_ilo4_ssh – Fence agent for HP iLO4 over SSH (symlink) Description fence_ilo_ssh is a fence agent that connects to iLO device. It logs into device via ssh and reboot a specified outlet. fence_ilo4_ssh accepts options on…
fence_ilo4 – Fence agent for IPMI fence_ilo3 – Fence agent for HP iLO3 (symlink) fence_ilo4 – Fence agent for HP iLO4 (symlink) fence_imm – Fence agent for IBM Integrated Management Module (symlink) fence_idrac – Fence agent for Dell iDRAC (symlink) Description fence_ipmilan is an I/O Fencing agentwhich can be used with machines controlled by IPMI.This…
fence_ilo3_ssh – Fence agent for HP iLO over SSH fence_ilo3_ssh – Fence agent for HP iLO3 over SSH (symlink) fence_ilo4_ssh – Fence agent for HP iLO4 over SSH (symlink) Description fence_ilo_ssh is a fence agent that connects to iLO device. It logs into device via ssh and reboot a specified outlet. fence_ilo3_ssh accepts options on…
fence_ilo3 – Fence agent for IPMI fence_ilo3 – Fence agent for HP iLO3 (symlink) fence_ilo4 – Fence agent for HP iLO4 (symlink) fence_imm – Fence agent for IBM Integrated Management Module (symlink) fence_idrac – Fence agent for Dell iDRAC (symlink) Description fence_ipmilan is an I/O Fencing agentwhich can be used with machines controlled by IPMI.This…
fence_ilo2 – Fence agent for HP iLO fence_ilo2 – Fence agent for HP iLO2 (symlink) Description fence_ilo is an I/O Fencing agent used for HP servers with the Integrated Light Out (iLO) PCI card.The agent opens an SSL connection to the iLO card. Once the SSL connection is established, the agent is able to communicate…
fence_ilo – Fence agent for HP iLO fence_ilo2 – Fence agent for HP iLO2 (symlink) Description fence_ilo is an I/O Fencing agent used for HP servers with the Integrated Light Out (iLO) PCI card.The agent opens an SSL connection to the iLO card. Once the SSL connection is established, the agent is able to communicate…
fence_ifmib – Fence agent for IF MIB Description fence_ifmib is an I/O Fencing agent which can be used with any SNMP IF-MIB capable device. It was written with managed ethernet switches in mind, in order to fence iSCSI SAN connections. However, there are many devices that support the IF-MIB interface. The agent uses IF-MIB::ifAdminStatus to…
fence_idrac – Fence agent for IPMI fence_ilo3 – Fence agent for HP iLO3 (symlink) fence_ilo4 – Fence agent for HP iLO4 (symlink) fence_imm – Fence agent for IBM Integrated Management Module (symlink) fence_idrac – Fence agent for Dell iDRAC (symlink) Description fence_ipmilan is an I/O Fencing agentwhich can be used with machines controlled by IPMI.This…
fence_ibmblade – Fence agent for IBM BladeCenter over SNMP Description fence_ibmblade is an I/O Fencing agent which can be used with IBM BladeCenter chassis. It issues SNMP Set request to BladeCenter chassis, rebooting, powering up or down the specified Blade Server. fence_ibmblade accepts options on the command line as well as from stdin. Fenced sends…
fence_hpblade – Fence agent for HP BladeSystem Description fence_hpblade is an I/O Fencing agent which can be used with HP BladeSystem and HP Integrity Superdome X. It logs into the onboard administrator of an enclosure via telnet or ssh and uses the command line interface to power blades or partitions on or off. fence_hpblade accepts…