The Linux Manuals (man pages) document is an important part of Linux documents. Linux Manuals are organized as several sections. Each section has a group of commands for a specific area in Linux usage, administration or development.
fence_eps – Fence agent for ePowerSwitch Description fence_eps is an I/O Fencing agent which can be used with the ePowerSwitch 8M+ power switch to fence connected machines. Fence agent works ONLY on 8M+ device, because this is only one, which has support for hidden page feature. Agent basically works by connecting to hidden page and…
fence_emerson – Fence agent for Emerson over SNMP Description fence_emerson is an I/O Fencing agent which can be used with MPX and MPH2 managed rack PDU. fence_emerson accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_emerson can be run by itself with…
fence_egenera – I/O Fencing agent for the Egenera BladeFrame Synopsis fence_egenera [OPTION]… Description fence_egenera is an I/O Fencing agent which can be used with the Egenera BladeFrame. It logs into a control blade (cserver) via ssh and operates on a processing blade (pserver) identified by the pserver name and the logical process area network (LPAN)…
fence_eaton_snmp – Fence agent for Eaton over SNMP Description fence_eaton_snmp is an I/O Fencing agent which can be used with the Eaton network power switch. It logs into a device via SNMP and reboots a specified outlet. It supports SNMP v1 and v3 with all combinations of authenticity/privacy settings. fence_eaton_snmp accepts options on the command…
fence_drac5 – Fence agent for Dell DRAC CMC/5 Description fence_drac5 is an I/O Fencing agent which can be used with the Dell Remote Access Card v5 or CMC (DRAC). This device provides remote access to controlling power to a server. It logs into the DRAC through the telnet/ssh interface of the card. By default, the…
fence_drac – fencing agent for Dell Remote Access Card Synopsis fence_drac [OPTION]… Description fence_drac is an I/O Fencing agent which can be used with the Dell Remote Access Card (DRAC). This card provides remote access to controlling power to a server. It logs into the DRAC through the telnet interface of the card. By default,…
fence_cpint – I/O Fencing agent for GFS on s390 and zSeries VM clusters Synopsis fence_cpint [OPTION]… Description fence_cpint is an I/O Fencing agent used on a virtual machine running GFS in a s390 or zSeries VM cluster. It uses the cpint package to send a CP LOGOFF command to the specified virtual machine. For fence_cpint…
fence_compute – Fence agent for the automatic resurrection of OpenStack compute instances Description Used to tell Nova that compute nodes are down and to reschedule flagged instances fence_compute accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_compute can be run by itself…
fence_cisco_ucs – Fence agent for Cisco UCS Description fence_cisco_ucs is an I/O Fencing agent which can be used with Cisco UCS to fence machines. fence_cisco_ucs accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_cisco_ucs can be run by itself with command line…
fence_cisco_mds – Fence agent for Cisco MDS Description fence_cisco_mds is an I/O Fencing agent which can be used with any Cisco MDS 9000 series with SNMP enabled device. fence_cisco_mds accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_cisco_mds can be run by…
fence_bullpap – I/O Fencing agent for Bull FAME architecture controlled by a PAP management console. Synopsis fence_bullpap [OPTION]… Description fence_bullpap is an I/O Fencing agent which can be used with Bull’s NovaScale machines controlled by PAP management consoles. This agent calls Bull’s support software provided by the NSMasterHW RPM available from Bull. fence_bullpap accepts options…
fence_brocade – Fence agent for HP Brocade over telnet/ssh Description fence_brocade is an I/O Fencing agent which can be used with Brocade FC switches. It logs into a Brocade switch via telnet and disables a specified port. Disabling the port which a machine is connected to effectively fences that machine. Lengthy telnet connections to the…
fence_bladecenter_snmp – Fence agent for IBM BladeCenter over SNMP Description fence_bladecenter_snmp is an I/O Fencing agent which can be used with IBM BladeCenter chassis. It issues SNMP Set request to BladeCenter chassis, rebooting, powering up or down the specified Blade Server. fence_bladecenter_snmp accepts options on the command line as well as from stdin. Fenced sends…
fence_bladecenter – Fence agent for IBM BladeCenter Description fence_bladecenter is an I/O Fencing agent which can be used with IBM Bladecenters with recent enough firmware that includes telnet support. It logs into a Brocade chasis via telnet or ssh and uses the command line interface to power on and off blades. fence_bladecenter accepts options on…
fence_baytech – I/O Fencing agent for Baytech RPC switches in combination with a Cyclades Terminal Server Synopsis fence_baytech [OPTION]… Description This fencing agent is written for the Baytech RPC27-20nc in combination with a Cyclades terminal server. The Cyclades TS exports the RPC’s serial port via a Telnet interface. Other interfaces, such as SSH, are possible….
fence_apc_snmp – Fence agent for APC, Tripplite PDU over SNMP Description fence_apc_snmp is an I/O Fencing agent which can be used with the APC network power switch or Tripplite PDU devices.It logs into a device via SNMP and reboots a specified outlet. It supports SNMP v1, v2c, v3 with all combinations of authenticity/privacy settings. fence_apc_snmp…
fence_apc – Fence agent for APC over telnet/ssh Description fence_apc is an I/O Fencing agent which can be used with the APC network power switch. It logs into device via telnet/ssh and reboots a specified outlet. Lengthy telnet/ssh connections should be avoided while a GFS cluster is running because the connection will block any necessary…
fence_alom – Fence agent for Sun ALOM Description fence_alom is an I/O Fencing agent which can be used with ALOM connected machines. fence_alom accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_alom can be run by itself with command line options. This…
fence_ack_manual – a program to override fenced fencing operations Synopsis fence_ack_manual [OPTIONS] nodename Description When fenced(8) fails to fence a node, it retries indefinately. fence_ack_manual(8) tells fenced to stop retrying and consider the node fenced. It is important that this only be done after the node has been manually turned off or prevented from writing…
fedup – Fedora Upgrade tool Synopsis fedup [OPTIONS] SOURCE Description fedup is the Fedora Upgrade tool. The fedup client runs on the system to be upgraded. It determines what packages are needed for upgrade and gathers them from the source(s) given. It also fetches and sets up the boot images needed to run the upgrade…